Plates and panels
18650 Busbar Tracing Stencil (2×6)
- Bounding box
- 117.5 × 47.5 × 2.0 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- September 9, 2026
Download
Free to download and use. See the terms.
The prompt
This is an 18650 battery cell spacer for a surron Light Bee S battery pack. I need to create a stencil to trace into a sheet of copper to make new busbars for the pack. The stencil will be in a 2x6 row column formation. The center of one circle to the next is 18.5mm. The stencil must be 7.5 mm wide between each circle. Each circle should be 15mm around.
Parameters
| Name | Value | Range |
|---|---|---|
| Circle Diameter | 15 mm | 10 – 20 |
| Horizontal Center-to-Center | 18.5 mm | 15 – 25 |
| Vertical Gap Between Rows | 7.5 mm | 2 – 15 |
| Rows | 2 count | 1 – 10 |
| Columns | 6 count | 1 – 10 |
| Border Width | 5 mm | 2 – 20 |
| Stencil Thickness | 2 mm | 0.5 – 5 |
| Corner Radius | 3 mm | 0 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con