18650 Battery Enclosure

1 views

Bounding box: 146 × 76 × 32 mm
Engine: 3D Printing B-rep
Parameters: 16
Published: November 1, 2026

Download

Free to download and use. See the terms.

The prompt

// Carcasa para batería 18650 (Interior: 140 x 70 x 26 mm) // Grosor de pared: 3mm wall = 3; inner_l = 140; inner_w = 70; inner_h = 26; outer_l = inner_l + (wall * 2); outer_w = inner_w + (wall * 2); outer_h = inner_h + wall; // Caja base difference() { cube([outer_l, outer_w, outer_h]); translate([wall, wall, wall]) cube([inner_l, inner_w, inner_h + 1]); } // Tapa (desplazada a un lado para exportarla limpia) translate([outer_l + 10, 0, 0]) cube([outer_l, outer_w, 3]);

Parameters

Name	Value	Range
Inner cavity length	140 mm	40 – 200
Inner cavity width	70 mm	30 – 150
Inner cavity depth	26 mm	10 – 80
Wall thickness	3 mm	1.2 – 6
Floor thickness	3 mm	1.2 – 8
Outer corner radius	5 mm	0 – 15
Lid thickness	3 mm	1.2 – 8
Register lip height	3 mm	1 – 8
Register lip thickness	2 mm	1.2 – 5
Lip clearance per side	0.25 mm	0.1 – 0.5
M3 clearance hole diameter	3.4 mm	2 – 6
Counterbore diameter	6.5 mm	4 – 10
Counterbore depth	1.6 mm	0.5 – 4
Screw boss diameter	7 mm	5 – 12
Boss center inset from inner wall	7 mm	5 – 25
Screw thread engagement depth	12 mm	5 – 25

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS