Everything else
18650 Arduino Nano Enclosure
- Bounding box
- 75.0 × 49.2 × 20.0 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- September 28, 2026
Download
Free to download and use. See the terms.
The prompt
Нужно сделать коробочку в ней должны быть отсек для аккумулятора 18650 также в ней должны быть вмонтированы крепеж для микрик стандартный далее не большая стенка за этой стенкой находится плата ардуино нано также в самой коробке должно быть небольшое отверстие для индикации платы ардуино
Parameters
| Name | Value | Range |
|---|---|---|
| 18650 Diameter | 18.6 mm | 14 – 22 |
| 18650 Length | 65 mm | 50 – 80 |
| Arduino Nano Length | 45 mm | 35 – 60 |
| Arduino Nano Width | 18 mm | 14 – 25 |
| Wall Thickness | 2 mm | 1 – 4 |
| Floor Thickness | 2 mm | 1 – 4 |
| Battery Clearance | 0.4 mm | 0.1 – 2 |
| Divider Wall Thickness | 2 mm | 1 – 4 |
| Internal Height | 18 mm | 12 – 30 |
| End Clearance Gap | 2 mm | 0.5 – 6 |
| USB Slot Width | 10 mm | 6 – 16 |
| USB Slot Height | 6 mm | 3 – 12 |
| Wire Slot Width | 6 mm | 3 – 12 |
| Wire Slot Height | 6 mm | 3 – 12 |
| Outer Corner Radius | 1.5 mm | 0 – 5 |
| Microswitch Hole Pitch | 9.5 mm | 6 – 15 |
| Microswitch Hole Diameter | 2.2 mm | 1.5 – 4 |
| Microswitch Pad Width | 12 mm | 8 – 20 |
| Microswitch Pad Height | 8 mm | 5 – 15 |
| Microswitch Pad Thickness | 2 mm | 1 – 4 |
| Microswitch Mount Height | 12 mm | 8 – 20 |
| Microswitch Slot Width | 5 mm | 3 – 10 |
| Microswitch Slot Height | 4 mm | 2 – 8 |
| LED Indicator Hole Diameter | 3 mm | 1.5 – 6 |
| LED Indicator Height | 6 mm | 3 – 14 |
| LED Indicator X Offset | 0 mm | -30 – 30 |
| Nano Stop Wall Thickness | 2 mm | 1 – 4 |
| Nano Stop Wall Height | 4 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm