Everything else
18650 + Arduino Nano Case
- Bounding box
- 75.0 × 47.8 × 25.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- September 28, 2026
Download
Free to download and use. See the terms.
The prompt
Сделай пожалуйста коробочку с посадкой аккумулятора 18650 и платой ардуино нано
Parameters
| Name | Value | Range |
|---|---|---|
| Wall thickness | 3 mm | 1.6 – 6 |
| Floor thickness | 3 mm | 1.6 – 6 |
| Internal height | 22 mm | 12 – 45 |
| Outer corner radius | 3 mm | 0 – 10 |
| 18650 diameter | 18.4 mm | 14 – 26 |
| 18650 length | 65 mm | 30 – 75 |
| Battery side clearance | 0.8 mm | 0.2 – 3 |
| Battery end clearance | 2 mm | 0.5 – 8 |
| Divider thickness | 3 mm | 1.2 – 6 |
| Nano PCB length | 45 mm | 30 – 60 |
| Nano PCB width | 18 mm | 12 – 30 |
| Nano bay clearance | 1.6 mm | 0.4 – 5 |
| Nano seat depth | 1.6 mm | 0.4 – 5 |
| USB slot width | 9 mm | 4 – 20 |
| USB slot height | 4 mm | 2 – 12 |
| USB slot centre above seat | 4 mm | 1 – 15 |
| Wire notch width | 10 mm | 3 – 30 |
| Wire notch height | 8 mm | 2 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm