Everything else
18650 + Arduino Nano Box with Micro-Switch Mounts
- Bounding box
- 76.2 × 50.4 × 24.0 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- September 28, 2026
Download
Free to download and use. See the terms.
The prompt
Нужно сделать коробочку в ней должны быть отсек для аккумулятора 18650 также в ней должны быть вмонтированы крепежи для микриков стандартных далее не большая стенка за этой стенкой находится плата ардуино нано также в самой коробке должны отверстие для индикации платы ардуино
Parameters
| Name | Value | Range |
|---|---|---|
| Battery Diameter | 18.4 mm | 10 – 30 |
| Battery Length | 65.2 mm | 20 – 100 |
| Fit Clearance | 0.5 mm | 0 – 2 |
| End Gap | 2 mm | 0 – 10 |
| Nano Board Length | 45 mm | 20 – 80 |
| Nano Board Width | 18 mm | 10 – 40 |
| Divider Wall Thickness | 2 mm | 1 – 6 |
| Nano Stop Wall Thickness | 3 mm | 1.5 – 8 |
| Nano Stop Wall Height | 6 mm | 2 – 20 |
| USB Slot Width | 10 mm | 5 – 20 |
| USB Slot Height | 6 mm | 3 – 15 |
| Wire Slot Width | 8 mm | 3 – 20 |
| Wire Slot Height | 5 mm | 2 – 15 |
| Wall Thickness | 2 mm | 1 – 6 |
| Floor Thickness | 2 mm | 1 – 6 |
| Inner Cavity Height | 22 mm | 10 – 60 |
| Outer Corner Radius | 3 mm | 0 – 10 |
| Micro-Switch Hole Pitch | 9.5 mm | 5 – 20 |
| Micro-Switch Screw Hole Dia | 2.2 mm | 1.5 – 5 |
| Mount Pad Width | 18 mm | 12 – 24 |
| Mount Pad Height | 14 mm | 8 – 24 |
| Mount Pad Thickness | 3 mm | 1.5 – 8 |
| Mount Pad Centre Height | 15 mm | 6 – 20 |
| Actuator Slot Width | 6 mm | 3 – 12 |
| Actuator Slot Height | 5 mm | 2 – 12 |
| Indicator Hole Dia | 4 mm | 1.5 – 10 |
| Indicator Height Above Floor | 6 mm | 2 – 15 |
| Indicator X Offset | 0 mm | -25 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm