18650 16S7P Cell Support

1 views

Bounding box: 144.6 × 336.2 × 12 mm
Engine: 3D Printing B-rep
Parameters: 13
Published: October 29, 2026

Download

Free to download and use. See the terms.

The prompt

suport celule 18650 16s 7p

Parameters

Name	Value	Range
Cell pocket diameter	18.6 mm	18 – 19
Cell centre pitch	20 mm	19 – 22
Pocket depth	9.5 mm	4 – 20
Floor thickness	2.5 mm	1.5 – 6
Vent hole diameter	8 mm	4 – 14
Cells in parallel (P)	7 mm	4 – 10
Series groups per module (2 modules -> 16S)	8 mm	2 – 12
Outer wall thickness	3 mm	2 – 6
Wall carrying the dovetail groove	5 mm	4 – 10
Dovetail depth	3 mm	2 – 6
Dovetail root width	20 mm	10 – 30
Dovetail flare per side	2 mm	0.5 – 4
Sliding clearance	0.2 mm	0.1 – 0.4

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS