Everything else
.177 Pellet Dispenser Turntable
- Bounding box
- 49.9 × 49.9 × 14.9 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
帮我设计一个3D打印模型，.177铅弹收纳转盘，每转动一下，一个铅弹从底下出来，直径5cm左右
Parameters
| Name | Value | Range |
|---|---|---|
| Pellet diameter | 4.5 mm | 4 – 6 |
| Number of pellet pockets | 10 mm | 6 – 16 |
| Pocket pitch radius | 17 mm | 12 – 22 |
| Rotor diameter | 50 mm | 36 – 70 |
| Rotor thickness | 7 mm | 5 – 14 |
| Base plate diameter | 44 mm | 30 – 60 |
| Base plate thickness | 4 mm | 2 – 8 |
| Lid diameter | 42 mm | 28 – 56 |
| Lid thickness | 3.5 mm | 2 – 6 |
| Centre post diameter | 6 mm | 4 – 10 |
| Sliding clearance | 0.3 mm | 0.1 – 0.5 |
| Lid screw clearance | 3.4 mm | 2.5 – 5 |
| Number of grip flutes | 24 mm | 12 – 40 |
| Grip flute depth | 1.2 mm | 0.5 – 2.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm