Gears and transmission
17-inch 10-Spoke Aluminium Alloy Motorcycle Rims - Front and Rear
- Bounding box
- 431.9 × 431.8 × 89.1 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Two separate editable precision CAD solids for a 150cc street motorcycle, 10-spoke cast aluminium alloy style. Both use 431.8 mm nominal bead-seat diameter to match the previously built 17-inch tyres. Front nominal rim width 76.2 mm, rear 88.9 mm. Includes annular rim barrel, ten tapered spokes, central hub and axle bore. Concept geometry; axle and hub interface dimensions are assumed pending the motorcycle design specification. No tyres, brake discs, sprocket or fork parts.
Parameters
| Name | Value | Range |
|---|---|---|
| 17-inch bead-seat diameter | 431.8 mm | 431 – 433 |
| Rim barrel radial depth | 10 mm | 7 – 14 |
| Spoke count | 10 count | 10 – 10 |
| Bead retaining lip width | 4 mm | 2 – 6 |
| Bead retaining lip radial height | 2 mm | 1 – 3 |
| Front rim axial width | 76.2 mm | 63.5 – 88.9 |
| Front axle bore | 15 mm | 12 – 20 |
| Front hub outer diameter | 70 mm | 55 – 90 |
| Front spoke root width | 14 mm | 10 – 20 |
| Rear rim axial width | 88.9 mm | 76.2 – 114.3 |
| Rear axle bore | 17 mm | 14 – 25 |
| Rear hub outer diameter | 85 mm | 65 – 105 |
| Rear spoke root width | 17 mm | 12 – 24 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled