Everything else
12-inch Subwoofer Assembly
- Bounding box
- 330.1 × 330.1 × 132.5 mm
- Engine
- Precision B-rep
- Parameters
- 33
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Hello find reference image of; Dyno intense 12ds, then generate it with all the details
Parameters
| Name | Value | Range |
|---|---|---|
| Frame Outer Diameter | 330 mm | 300 – 360 |
| Frame Flange Inner Diameter | 260 mm | 240 – 280 |
| Flange Thickness | 5 mm | 3 – 8 |
| Basket Wall Thickness | 5 mm | 3 – 7 |
| Number of Spokes | 12 | 6 – 24 |
| Spoke Cutout Width | 20 mm | 10 – 30 |
| Cone Outer Diameter | 260 mm | 240 – 280 |
| Cone Inner Diameter (Neck) | 75 mm | 50 – 100 |
| Cone Depth (Flange to Neck) | 40 mm | 20 – 70 |
| Cone Material Thickness | 2 mm | 1 – 4 |
| Voice Coil OD | 75 mm | 50 – 120 |
| Voice Coil Inner Diam. | 66 mm | 50 – 115 |
| Voice Coil Height | 80 mm | 50 – 120 |
| Cone Neck Z (below flange) | -40 mm | -70 – -20 |
| Magnet Outer Diam. | 185 mm | 150 – 220 |
| Magnet Inner Diam. | 100 mm | 80 – 130 |
| Magnet Thickness | 50 mm | 30 – 70 |
| Back Plate Thickness | 10 mm | 5 – 20 |
| Top Plate Thickness | 10 mm | 5 – 15 |
| Pole Piece Diam. | 65 mm | 40 – 90 |
| Pole Piece Height | 120 mm | 80 – 160 |
| Top Plate Inner Diam. | 76 mm | 50 – 90 |
| Magnet Assembly Bottom Z | -130 mm | -180 – -100 |
| Spider Outer Diam. | 180 mm | 150 – 200 |
| Spider Inner Diam. | 75 mm | 50 – 90 |
| Spider Thickness | 2 mm | 1 – 4 |
| Spider Z Position (top) | -60 mm | -80 – -30 |
| Dust Cap Diameter | 100 mm | 60 – 120 |
| Dust Cap Height | 5 mm | 2 – 10 |
| Terminal Block Width | 30 mm | 20 – 50 |
| Terminal Block Height | 5 mm | 3 – 10 |
| Terminal Block Depth | 10 mm | 5 – 20 |
| Terminal Angular Position | 45 deg | 0 – 360 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm