Gears and transmission
11T Roller Chain Sprocket
- Bounding box
- 87.0 × 87.8 × 2.5 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- October 20, 2026
Download
Free to download and use. See the terms.
The prompt
I need an 11-tooth sprocket with a pitch of 22 mm, a tooth width at the root of 9 mm, a overall height/thickness of 2.5 mm, a 7 mm center bore, and a 3x4 mm keyway.
Parameters
| Name | Value | Range |
|---|---|---|
| Number of Teeth | 11 teeth | 6 – 60 |
| Chain Pitch | 22 mm | 6 – 60 |
| Tooth Width at Root | 9 mm | 2 – 30 |
| Tip Width / Root Width | 0.55 ratio | 0.3 – 0.9 |
| Chain Roller Diameter | 10 mm | 3 – 30 |
| Plate Thickness (overall height) | 2.5 mm | 1 – 20 |
| Hub Diameter | 22 mm | 10 – 70 |
| Hub Length (flush at 2.5) | 2.5 mm | 2.5 – 40 |
| Center Bore Diameter | 7 mm | 3 – 40 |
| Keyway Width | 3 mm | 0.5 – 12 |
| Keyway Depth | 4 mm | 0.5 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled