Gears and transmission
10R80 Transmission Case with 1-5 Gear Train
- Bounding box
- 360.6 × 360.5 × 670.1 mm
- Engine
- Precision B-rep
- Parameters
- 32
- Published
- October 1, 2026
Download
Free to download and use. See the terms.
The prompt
Add the gears from 1 to five
Parameters
| Name | Value | Range |
|---|---|---|
| Bell Housing Dia | 360 mm | 150 – 500 |
| Front Flange Thickness | 8 mm | 3 – 25 |
| Bell Housing Length | 120 mm | 40 – 250 |
| Converter Recess Dia | 320 mm | 100 – 460 |
| Converter Recess Depth | 15 mm | 2 – 60 |
| Case Front Dia | 300 mm | 120 – 460 |
| Case Length | 380 mm | 120 – 600 |
| Case Rear Dia | 240 mm | 100 – 420 |
| Gear Chamber Dia | 200 mm | 100 – 260 |
| Tail Housing Dia | 180 mm | 60 – 320 |
| Tail Housing Length | 110 mm | 30 – 260 |
| Tail Flange Dia | 210 mm | 80 – 400 |
| Tail Flange Thickness | 12 mm | 3 – 30 |
| Output Shaft Dia | 40 mm | 10 – 80 |
| Output Shaft Length | 60 mm | 10 – 200 |
| Main (Input) Shaft Dia | 26 mm | 8 – 60 |
| Countershaft Dia | 20 mm | 6 – 50 |
| Gear Module | 2 mm | 1 – 4 |
| Tooth Sum per Pair | 50 teeth | 30 – 90 |
| Gear Face Width | 14 mm | 5 – 40 |
| 1st Gear Teeth (main) | 30 teeth | 12 – 50 |
| 2nd Gear Teeth (main) | 27 teeth | 12 – 50 |
| 3rd Gear Teeth (main) | 25 teeth | 12 – 50 |
| 4th Gear Teeth (main) | 23 teeth | 12 – 50 |
| 5th Gear Teeth (main) | 20 teeth | 12 – 50 |
| Bell Bolt Count | 8 pcs | 3 – 16 |
| Bell Bolt Circle Dia | 340 mm | 60 – 460 |
| Bell Bolt Hole Dia | 12 mm | 4 – 25 |
| Tail Bolt Count | 6 pcs | 3 – 12 |
| Tail Bolt Circle Dia | 190 mm | 40 – 320 |
| Tail Bolt Hole Dia | 10 mm | 4 – 20 |
| Front Rim Fillet | 3 mm | 0 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled