10-Tooth Tapered Bevel Gear with Square Drive Socket

Create a single solid straight-tooth tapered bevel gear matching the attached reference image as closely as possible. Use millimeters. Overall dimensions Total height: 45.22 mm Total number of teeth: 10 Top circular diameter of toothed section: 18.42 mm Tooth radial depth: 3.60 mm Bottom circular flange outer diameter: 24.89 mm GEOMETRY — IMPORTANT The part has three clearly separated axial sections: Bottom circular flange Short cylindrical middle/neck section Upper tapered 10-tooth section Total height of the bottom flange + middle neck together is 16.49 mm. Use approximately 11.00 mm for the bottom flange height and 5.49 mm for the middle neck height, giving: 11.00 + 5.49 = 16.49 mm. The remaining 28.73 mm is the upper toothed section: 45.22 − 16.49 = 28.73 mm. The upper section must be tapered/conical, becoming narrower toward the top, matching the reference photograph. Create exactly 10 straight longitudinal bevel-gear teeth, evenly spaced at 36° intervals around the axis. The teeth must follow the taper of the gear body from bottom to top. They must not be simple straight rectangular extrusions on a cylinder. Tooth radial depth is 3.60 mm. Create distinct tooth flanks and valleys between adjacent teeth. The top of the toothed section terminates in the 18.42 mm diameter circular top face. BOTTOM FLANGE + NECK Bottom flange is a circular disk with 24.89 mm outer diameter. Above the flange, create a short smaller cylindrical neck/transition section. The flange and neck together occupy exactly 16.49 mm of axial height. Blend/transition the neck smoothly into the tapered toothed section, matching the reference image. SQUARE INTERNAL SOCKET — CRITICAL On the bottom face, create a square internal socket. Square size: 10.81 mm × 11.22 mm. Socket depth: EXACTLY 16.49 mm measured upward from the bottom face. This is a blind square pocket, NOT a through-hole. DO NOT extend the square socket through the 45.22 mm total height. The square socket must stop at exactly 16.49 mm from the bottom. Keep solid material above the socket for the entire upper toothed section. FINAL SHAPE The result must visually match the reference: a wide circular bottom flange, short narrow middle neck, and a tapered upper body containing 10 longitudinal bevel teeth. Maintain rotational symmetry. Do not add extra teeth. Do not make the upper body cylindrical. Do not make the square socket a through-hole. Do not extend the square feature into the toothed section. Produce a single editable solid parametric CAD model. One thing I deliberately changed I would NOT tell the AI that 16.49 mm is only the square-pocket depth anymore. Based on what you've now explained, the working interpretation is: 45.22 mm total → 16.49 mm bottom + middle → 28.73 mm upper toothed section and the square socket also has 16.49 mm depth.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.