Everything else
10 L Insulated Rotary Ice Machine
- Bounding box
- 349.1 × 349.0 × 270.4 mm
- Engine
- Precision B-rep
- Parameters
- 35
- Published
- October 30, 2026
Download
Free to download and use. See the terms.
The prompt
Make a design for a rotary ice machine that can hold a total of 10 liters of contents with two outer walls and foam in between.
Parameters
| Name | Value | Range |
|---|---|---|
| Total Contents | 10 L | 2 – 40 |
| Inner Bowl Diameter | 260 mm | 150 – 400 |
| Liner Wall Thickness | 3 mm | 1.5 – 8 |
| Liner Bottom Thickness | 5 mm | 2 – 20 |
| Rim Overhang | 15 mm | 5 – 40 |
| Rim Cap Thickness | 6 mm | 2 – 20 |
| Foam Insulation Layer | 25 mm | 5 – 60 |
| Outer Shell Thickness | 1.5 mm | 0.8 – 6 |
| Bottom Boss Diameter | 40 mm | 15 – 90 |
| Bottom Boss Height | 30 mm | 5 – 80 |
| Drive Shaft Diameter | 12 mm | 5 – 40 |
| Shaft Fit Clearance | 0.4 mm | 0.05 – 2 |
| Shaft Top Extension | 40 mm | 5 – 120 |
| Drive Hex Across Flats | 10 mm | 4 – 30 |
| Drive Hex Height | 12 mm | 3 – 40 |
| Lid Thickness | 6 mm | 2 – 20 |
| Lid Lip Depth | 6 mm | 2 – 20 |
| Lid Lip Clearance | 1 mm | 0.1 – 5 |
| Lid Bearing Boss Diameter | 45 mm | 15 – 100 |
| Lid Bearing Boss Height | 25 mm | 5 – 80 |
| Fill Port Bore | 40 mm | 10 – 100 |
| Fill Port Offset | 65 mm | 0 – 150 |
| Fill Collar Height | 12 mm | 2 – 40 |
| Vent Hole Diameter | 4 mm | 1 – 20 |
| Dasher Hub Diameter | 45 mm | 15 – 100 |
| Dasher Bottom Clearance | 6 mm | 1 – 30 |
| Dasher Top Clearance | 12 mm | 2 – 60 |
| Blade Count | 3 count | 2 – 8 |
| Blade Sweep Angle | 40 deg | 10 – 90 |
| Blade Radial Thickness | 8 mm | 2 – 30 |
| Blade Wall Clearance | 3 mm | 0.5 – 20 |
| Rib Thickness | 5 mm | 1 – 20 |
| Plinth Thickness | 12 mm | 3 – 40 |
| Plinth Pocket Depth | 6 mm | 1 – 30 |
| Plinth Margin | 12 mm | 0 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm