Everything else
1/24 RC Drift Car Printable Model
- Bounding box
- 170 × 84 × 35.4 mm
- Engine
- 3D Printing B-rep
- Parameters
- 15
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
I want to made 1/24 Rc drift car with 3D printer.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length | 170 mm | 100 – 250 |
| Body width | 78 mm | 60 – 120 |
| Wheelbase | 105 mm | 70 – 160 |
| Track width | 70 mm | 50 – 100 |
| Wheel diameter | 28 mm | 18 – 45 |
| Wheel width | 12 mm | 6 – 20 |
| Ground clearance | 6 mm | 3 – 12 |
| Chassis thickness | 3 mm | 2 – 6 |
| Body height above chassis | 30 mm | 20 – 50 |
| Axle diameter | 5 mm | 3 – 8 |
| Motor screw hole | 3.4 mm | 2 – 5 |
| Battery slot length | 55 mm | 30 – 80 |
| Battery slot width | 32 mm | 20 – 50 |
| Servo slot length | 24 mm | 15 – 40 |
| Servo slot width | 24 mm | 15 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm