Loading the interactive model…
Interactive 3D model of Wrist-Mounted V2 Gearbox Frame (Rescaled)Gears and transmission
Wrist-Mounted V2 Gearbox Frame (Rescaled)
1 views
- Bounding box
- 203.6 × 84.0 × 170.0 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- September 13, 2026
Download
Free to download and use. See the terms.
The prompt
This is way to small for the gearbox
Parameters
| Name | Value | Range |
|---|---|---|
| Gearbox Length | 150 mm | 80 – 260 |
| Gearbox Width | 30 mm | 15 – 70 |
| Gearbox Height | 100 mm | 40 – 200 |
| Pocket Clearance | 0.3 mm | 0 – 2 |
| Frame Width (Y) | 60 mm | 30 – 140 |
| Frame Height (Z) | 110 mm | 40 – 240 |
| Floor Plate Thickness | 5 mm | 2 – 20 |
| Rear Wall Thickness | 8 mm | 3 – 40 |
| Front Block Length | 45 mm | 10 – 140 |
| Barrel / Hop Bore Dia | 26 mm | 5 – 60 |
| Bore Axis Height | 80 mm | 10 – 220 |
| Magwell X Position | 66 mm | 0 – 300 |
| Magwell Length | 88 mm | 20 – 160 |
| Magwell Width | 34 mm | 15 – 90 |
| Magwell Wall | 5 mm | 1.5 – 12 |
| Magwell Depth | 60 mm | 10 – 160 |
| Strap Tunnel Width | 50 mm | 10 – 140 |
| Loop Foot Width | 6 mm | 2 – 25 |
| Loop Standoff | 12 mm | 4 – 35 |
| Loop Outer Band | 4 mm | 1.5 – 14 |
| Loop Length (Z) | 55 mm | 10 – 160 |
| Loop Centre Height | 40 mm | 0 – 220 |
| Rear Loop X | 45 mm | 0 – 340 |
| Front Loop X | 135 mm | 0 – 340 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
STEPSTLGLB16 PARAMS
Spur Gear (12 Teeth)
Built a gear with 12 teeth
STEPSTLGLB5 PARAMS
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
STEPSTLGLB7 PARAMS