Gears and transmission
Worm Drive 4mm (single-start worm + 10T helical wheel)
- Bounding box
- 18 × 9.2 × 5.6 mm
- Engine
- 3D Printing B-rep
- Parameters
- 10
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
gnerate a wome gear and a heleca gaer mechanicism with a pitch diameter of 4 mm each
Parameters
| Name | Value | Range |
|---|---|---|
| Worm pitch diameter | 4 mm | 2 – 20 |
| Worm outside diameter | 5.6 mm | 3 – 25 |
| Worm overall length | 18 mm | 8 – 60 |
| Threaded length at right end | 10 mm | 3 – 40 |
| Shaft end diameter | 2 mm | 1 – 8 |
| Number of gear teeth | 10 mm | 6 – 60 |
| Gear pitch diameter | 4 mm | 2 – 20 |
| Gear face width | 3 mm | 1 – 20 |
| Gear bore diameter | 2 mm | 0.6 – 10 |
| Worm / gear centre distance | 4 mm | 2 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
