Plates and panels
Worker Holding Ingot Figurine
- Bounding box
- 80.0 × 60.0 × 170.0 mm
- Engine
- Precision B-rep
- Parameters
- 31
- Published
- October 2, 2026
Download
Free to download and use. See the terms.
The prompt
“A cast metal figurine of a worker standing upright on a rectangular base plate. The worker is wearing a work jacket and trousers, with both arms raised straight up above the head, holding a large rectangular block (ingot/brick) horizontally with both hands. The base plate is a flat rectangular slab approximately 60mm x 60mm x 15mm. The total height of the figurine including the base is approximately 170mm. The figure has a rough cast metal texture. The block held above the head is approximately 80mm wide, 30mm deep, and 20mm thick. The worker’s body is stylized and simplified, with visible arms, torso, legs, and boots. The pose is symmetrical with arms forming an inverted V shape supporting the block
Parameters
| Name | Value | Range |
|---|---|---|
| Base Width (X) | 60 mm | 30 – 120 |
| Base Depth (Y) | 60 mm | 30 – 120 |
| Base Thickness | 15 mm | 5 – 40 |
| Base Edge Fillet | 3 mm | 0.5 – 8 |
| Overall Height | 170 mm | 110 – 320 |
| Ingot Width (X) | 80 mm | 30 – 160 |
| Ingot Depth (Y) | 30 mm | 10 – 80 |
| Ingot Thickness (Z) | 20 mm | 6 – 60 |
| Ingot Edge Fillet | 2 mm | 0.5 – 6 |
| Hip Height (from base bottom) | 78 mm | 30 – 200 |
| Shoulder Height | 124 mm | 50 – 280 |
| Torso Width at Hips | 26 mm | 10 – 60 |
| Torso Width at Shoulders | 30 mm | 10 – 70 |
| Torso Depth (Y) | 16 mm | 6 – 40 |
| Leg Centre Offset | 6.5 mm | 2 – 25 |
| Leg Section at Hip | 12 mm | 5 – 30 |
| Leg Section at Ankle | 11 mm | 4 – 28 |
| Boot Width (X) | 13 mm | 5 – 35 |
| Boot Length (Y) | 26 mm | 8 – 60 |
| Boot Height | 12 mm | 4 – 35 |
| Boot Toe Offset (Y) | -3 mm | -20 – 20 |
| Head Diameter | 18 mm | 8 – 40 |
| Gap: Head to Ingot | 3 mm | 0.5 – 20 |
| Neck Diameter | 9 mm | 4 – 25 |
| Shoulder Joint Offset (X) | 13 mm | 4 – 40 |
| Arm Diameter at Shoulder | 11 mm | 4 – 30 |
| Arm Diameter at Wrist | 7 mm | 3 – 25 |
| Hand Grip Offset (X) | 30 mm | 8 – 70 |
| Hand Width (X) | 15 mm | 5 – 40 |
| Hand Depth (Y) | 18 mm | 5 – 40 |
| Hand Height (Z) | 14 mm | 4 – 35 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Orbital Launch Vehicle Display Model
Highly detailed, realistic non-functional space-launch rocket display model for 3D printing: 240 mm tall, 34 mm max diameter, tapered interstage, ogive nose, fairing seam, service