Plates and panels
Wooden Bed Headboard
- Bounding box
- 1700 × 50 × 1300 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
When installing back slats (backing battens) evenly so that the first and last slats are perfectly flush with the panel ends, your formula depends on whether you want to measure the clear gap between slats or mark the positions sequentially from one edge using a tape measure.
Parameters
| Name | Value | Range |
|---|---|---|
| Plank length / panel width between posts | 1600 mm | 800 – 2400 |
| Plank width, one board of the stack | 95 mm | 50 – 200 |
| Plank thickness | 20 mm | 10 – 40 |
| Number of stacked horizontal planks | 12 mm | 3 – 30 |
| Chamfer on the plank long edges | 1.5 mm | 0.5 – 4 |
| Panel set-back behind the frame front | 5 mm | 0 – 20 |
| Number of vertical support battens | 4 mm | 2 – 8 |
| Batten width | 30 mm | 15 – 80 |
| Batten thickness | 20 mm | 10 – 40 |
| Square side-post timber size | 50 mm | 30 – 100 |
| Square top-rail timber size | 50 mm | 30 – 100 |
| Post length, floor to top of headboard | 1300 mm | 600 – 2200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Enclosure with Camera Lens & Sun Visor
On the orange front faceplate piece, cut a 15mm circular hole centered horizontally in the upper third section for a camera lens aperture. Directly above this circular hole, projec
Foldable Emergency Rescue Stretcher
Create an editable 3D CAD model of a foldable emergency rescue stretcher matching the reference image. Dimensions: 2100 × 550 mm. Use two parallel silver aluminum tube rails, four