Plates and panels
Winter Jacket with Sleeves and Serpentine Tubes
- Bounding box
- 894.4 × 800.1 × 373.0 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
full-size winter jacket with sleeves, serpentine tube network routed through the jacket wall, and bolts for the external hardware plate
Parameters
| Name | Value | Range |
|---|---|---|
| Jacket width | 600 mm | 520 – 680 |
| Jacket height | 760 mm | 680 – 820 |
| Hem position Y | -20 mm | -40 – 0 |
| Jacket depth | 340 mm | 300 – 400 |
| Insulated wall thickness | 30 mm | 24 – 40 |
| Torso corner radius | 70 mm | 60 – 90 |
| Sleeve outer radius | 95 mm | 85 – 110 |
| Sleeve length | 600 mm | 500 – 700 |
| Sleeve angle from vertical | 15 deg | 5 – 30 |
| Sleeve start inset from side | 100 mm | 70 – 140 |
| Sleeve start below top | 150 mm | 120 – 200 |
| Neck opening radius | 100 mm | 80 – 115 |
| Collar height | 40 mm | 20 – 60 |
| Tube OD | 10 mm | 8 – 14 |
| Tube wall | 1.5 mm | 1 – 3 |
| Serpentine bend radius | 35 mm | 30 – 40 |
| Runs per panel | 6 | 4 – 6 |
| Lowest serpentine run Y | 192 mm | 150 – 220 |
| Serpentine left end X | 60 mm | 50 – 100 |
| Hot outlet pass-through X | 375 mm | 350 – 400 |
| Return inlet pass-through X | 75 mm | 60 – 100 |
| Coil tail Z | 31 mm | 25 – 40 |
| Return line Y | -8 mm | -15 – 0 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Gabinete Gamer DeX com Suporte Interno para Hub USB-C
Atualize o projeto 3D existente sem mudar o restante do design. - Esconda o hub USB-C em um compartimento interno com tampa removível. - Crie um suporte para o hub entre duas pare
Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
Interdigital Electrode Pattern
### FIG. 2 — Top plan view of the interdigital electrode pattern *Suggested template: USPTO Line Art / Electronic Circuit* ``` FIG. 2: A top plan (bird's-eye) view of an interdigi
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
