Plates and panels
Wheel Spacer Disc
- Bounding box
- 180 × 180 × 25 mm
- Engine
- 3D Printing B-rep
- Parameters
- 7
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
25mm thick disc. 5 x 120 PCD. 66.6mm centre bore. 180 OD
Parameters
| Name | Value | Range |
|---|---|---|
| Outer diameter | 180 mm | 50 – 300 |
| Thickness | 25 mm | 5 – 60 |
| Centre bore diameter | 66.6 mm | 20 – 120 |
| Stud bolt circle PCD | 120 mm | 50 – 200 |
| Number of stud holes | 5 mm | 3 – 10 |
| Stud hole diameter | 15 mm | 5 – 25 |
| Edge chamfer | 1 mm | 0 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Enclosure with Camera Lens & Sun Visor
On the orange front faceplate piece, cut a 15mm circular hole centered horizontally in the upper third section for a camera lens aperture. Directly above this circular hole, projec
Foldable Emergency Rescue Stretcher
Create an editable 3D CAD model of a foldable emergency rescue stretcher matching the reference image. Dimensions: 2100 × 550 mm. Use two parallel silver aluminum tube rails, four