Plates and panels
Web-Shooter Wristlet Assembly
- Bounding box
- 139.0 × 50.0 × 56.0 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- August 28, 2026
Download
Free to download and use. See the terms.
The prompt
The spinneret mechanisms in each web-shooter are machined from stainless steel, except for the turbine component, which is machined out of a block of Teflon, and the two turbine bearings, which are made of amber and artificial sapphire. The wristlets and the web-fluid cartridges, the latter of which Spider-Man wears on his belt beneath his costume's tunic, are mainly nickel-plated annealed brass. The wristlets have sharp steel nipples, which pierce the bronze caps when the cartridges are tightly wedged into their positions. (Can u make a blueprint of these description to manufacture it in real life)
Parameters
| Name | Value | Range |
|---|---|---|
| Wristlet Length | 70 mm | 50 – 100 |
| Wristlet Width | 50 mm | 30 – 80 |
| Wristlet Height | 12 mm | 6 – 20 |
| Spinneret Length | 60 mm | 40 – 80 |
| Spinneret Width | 40 mm | 25 – 60 |
| Spinneret Height | 15 mm | 8 – 30 |
| Turbine Diameter | 25 mm | 10 – 40 |
| Turbine Thickness | 8 mm | 3 – 15 |
| Turbine Front Offset | 10 mm | 0 – 20 |
| Bearing Diameter | 8 mm | 4 – 15 |
| Bearing Thickness | 4 mm | 2 – 10 |
| Bearing Gap From Turbine | 2 mm | 0 – 8 |
| Steel Nipple Base Diameter | 4 mm | 2 – 8 |
| Steel Nipple Length | 5 mm | 3 – 12 |
| Nipple Edge Offset | 15 mm | 12.5 – 30 |
| Cartridge Diameter | 25 mm | 12 – 40 |
| Cartridge Length | 40 mm | 20 – 80 |
| Bronze Cap Diameter | 27 mm | 15 – 45 |
| Bronze Cap Thickness | 2 mm | 1 – 6 |
| Nipple-Cap Overlap | 1.5 mm | 0.5 – 5 |
| Cap-Cartridge Overlap | 1 mm | 0.5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con