Plates and panels
Wall System with Framed Windows
- Bounding box
- 3600.0 × 2400.0 × 60.1 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
make a wall system similar to metro, the wall is just normal thin sheet, in it, windows with a border radius big enough, every window have a frame rounded, and the window itself is split horizontally into 2 section, first section 30% height, and the second section dowsn, a thick separatr between the both parts, and top section have 2 handles,
Parameters
| Name | Value | Range |
|---|---|---|
| Wall Length (X) | 3600 mm | 1000 – 10000 |
| Wall Height (Y) | 2400 mm | 1000 – 10000 |
| Wall Thickness (Z) | 20 mm | 1 – 100 |
| Opening Width | 900 mm | 100 – 5000 |
| Opening Height | 1200 mm | 100 – 5000 |
| Corner Radius | 150 mm | 10 – 500 |
| Left Opening Center X | -900 mm | -2000 – 0 |
| Right Opening Center X | 900 mm | 0 – 2000 |
| Frame Profile Width | 60 mm | 10 – 300 |
| Frame Depth (Z) | 60 mm | 10 – 300 |
| Upper Glass Height | 260 mm | 50 – 2000 |
| Lower Glass Height | 740 mm | 50 – 2000 |
| Glass Thickness | 6 mm | 1 – 20 |
| Separator Height | 40 mm | 10 – 200 |
| Separator Thickness (Z) | 20 mm | 5 – 100 |
| Separator Corner Radius | 5 mm | 0 – 20 |
| Handle Length | 120 mm | 10 – 300 |
| Handle Width (Y) | 12 mm | 2 – 50 |
| Handle Thickness (Z) | 15 mm | 2 – 50 |
| Handle Offset from Pane Edge | 30 mm | 0 – 500 |
| Handle Fillet Radius | 4 mm | 0 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con