Everything else
VibeSense Band
- Bounding box
- 150.0 × 30.0 × 8.0 mm
- Engine
- Precision B-rep
- Parameters
- 18
- Published
- September 11, 2026
Download
Free to download and use. See the terms.
The prompt
Create a compact 3D wearable VibeSense Band for deaf-blind users. Make a rounded rectangular wristband with an adjustable strap. Add a small OLED display on top, 4 directional vibration motors for Front/Back/Left/Right, 4 tactile buttons, one larger SOS button, RGB LED, buzzer opening and USB-C charging port. Include an internal compartment for ESP32, Li-Po battery and motor drivers. Make it lightweight, ergonomic, 3D-printable and clearly show the four directional vibration points. Create a realistic engineering prototype design, not a smartwatch.
Parameters
| Name | Value | Range |
|---|---|---|
| Band Length | 90 mm | 70 – 120 |
| Band Width | 30 mm | 20 – 40 |
| Band Thickness | 8 mm | 5 – 12 |
| Strap Length | 60 mm | 40 – 100 |
| Strap Width | 12 mm | 8 – 20 |
| Strap Thickness | 3 mm | 2 – 5 |
| Display Width | 20 mm | 10 – 30 |
| Display Height | 12 mm | 8 – 20 |
| Display Depth | 2 mm | 1 – 4 |
| Motor Diameter | 8 mm | 5 – 12 |
| Motor Depth | 3 mm | 2 – 5 |
| Button Diameter | 5 mm | 3 – 8 |
| SOS Button Diameter | 10 mm | 8 – 15 |
| LED Diameter | 3 mm | 2 – 5 |
| Buzzer Diameter | 8 mm | 5 – 12 |
| USB Width | 8 mm | 6 – 12 |
| USB Height | 3 mm | 2 – 5 |
| Compartment Depth | 5 mm | 3 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like