Vertical Algae Cultivation Panel

Create a detailed 3D CAD model of a vertical algae cultivation panel based on this design: MAIN ALGAE CHAMBER: - Transparent rectangular glass chamber. - Height: 30 inches. - Bottom length: 18 inches. - Depth/breadth: 10 inches. - Divide the 10-inch depth into two equal internal sections of 5 inches each using a transparent partition. SIDE BOXES: - Two transparent rectangular boxes placed on the left and right of the main chamber. - Each box: 43 cm length × 32 cm width × 20 cm height. - Left box = CULTURE BOX. - Right box = WATER BOX. - Both have removable lids and inlet/outlet pipe connections. INTERNAL SYSTEM: - Add 2 pumps at the bottom of the algae chamber: 1. Water circulation pump. 2. Aquarium air pump. - Add transparent tubes connecting the pumps, algae chamber, Culture Box and Water Box. - Show realistic pipe routing. LIGHTING AND OPTICAL LAYER: - Add vertical LED light strips on both sides of the algae chamber. - Add a thin patterned metamaterial/optical layer on the front of the algae chamber. SENSORS/DISPLAYS: - Add three small displays on the front/side: Temperature, pH and AQI. - Add one large horizontal digital display above the algae chamber showing AQI, temperature and pH. TOP: - Add an angled rectangular solar panel mounted above the digital display. BASE: - Add one common rectangular base supporting the entire system. - Make the base proportional to the complete assembly. Make the model clean, realistic, symmetrical and suitable for a technology-fest prototype presentation. Use transparent glass for the chamber and boxes, and clearly distinguish all major components.

Parameters

This model was generated without adjustable parameters. Open it in the editor to add your own dimensions.

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.