Organic and sculpted
Vape Organizer
- Bounding box
- 120 × 59.4 × 15.4 mm
- Engine
- Organic B-rep
- Parameters
- 0
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Create one solid 3D-printable vape organizer, millimeters, 254 (X) x 125 (Y) x 32 (Z). Origin at front-left-bottom corner; X left to right, Y front to back, Z up. Flat bottom at z=0, no supports. 1) Open tray: x 0-77, y 0-125, height 32. Walls and floor 2 mm thick, open top. 2) Atomizer platform: x 77-203.5, y 0-95, top at z=14. 12 flat-bottom circular recesses, 3 mm deep, each with a concentric blind hole D8.6 down to z=2. Column X: 96, 126.5, 154, 184.5. Row Y: 19, 49.5, 78. Recess diameters: D30.5 at (96,19) and (184.5,19); D26.5 at (96,78) and (184.5,78); all other 8 are D24.5. 3) Battery block: x 203.5-254, y 0-95. Top is flat at z=32 for y 0-36, then a smooth S-curve down to z=18 at y=80, then flat to y=95. 8 vertical D20 holes with flat bottoms at z=3. X: 217.5, 240.5. Y: 13, 36, 59, 82. 4) Drip tip strip: x 77-254, y 95-125, top at z=9. 17 holes D10.5, 7 mm deep. Y=103 and Y=117: x = 90, 108, 126, 144, 162, 180, 198 (7 each). Y=110: x = 213.5, 229.5, 245.5. Finish: R1 fillet on outer vertical edges, 0.5 chamfer on hole rims, minimum wall 2 mm. Export as a single solid (STEP preferred).
Parameters
This model was generated without adjustable parameters. Open it in the editor to add your own dimensions.
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →BioBuzz FTC Robot
I need a realistic model made for this years First Tech challenge 2026 BioBuzz competition. I need to create an intake system for the robot. I need a Main robot chassis, left/right
Push-Button Ratchet Mechanism
Create a simple 3D-printable push-button ratchet mechanism. Pressing a button once should rotate a circular wheel by exactly 30 degrees, then lock it in that position. Releasing th
Stable Monitoring Buoy
Design a simple, robust, 3D-printable floating buoy for an autonomous environmental monitoring system. PRIORITY #1: IT MUST FLOAT STABLY IN WATER WITH THE ELECTRONICS AND SENSORS
Scale Truss Bridge
Act as a structural design engineer. Create a 3D solid CAD model of a scale Warren/Pratt truss bridge in millimeters. Units: Millimeters (mm) Overall Dimensions: - Bridge Span (L
Eyeglass Frame (SDF)
Create a **fully parametric, engineering-grade 3D CAD model** of a modern rectangular eyeglass frame optimized for **FDM 3D printing**, with **all components printable separately a
Rectangular Box
create a simple rectangular box with exact dimensions.
