Gears and transmission
Two-Stage Spur Gearbox Assembly
- Bounding box
- 120 × 80 × 30 mm
- Engine
- 3D Printing B-rep
- Parameters
- 17
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Create a rectangular gearbox base plate measuring 120 mm in length, 80 mm in width, and 5 mm in thickness, positioned flat on the XY plane. Extrude three vertical cylindrical shafts upward from the top face of the plate, each with a diameter of 8 mm and a height of 25 mm. Position the shafts along the central longitudinal axis of the plate at the following coordinates relative to the plate center (0,0): - Shaft 1 (Input): x = -26.5 mm, y = 0 mm - Shaft 2 (Idler): x = -8.5 mm, y = 0 mm - Shaft 3 (Output): x = 26.5 mm, y = 0 mm Generate three spur gears aligned with the respective shafts, using a module of 1.0 mm and a gear thickness of 8 mm, positioned 2 mm above the base plate surface: - Gear 1 (Input on Shaft 1): 16 teeth, with an 8 mm central bore hole. - Gear 2 (Idler on Shaft 2): 20 teeth, with an 8 mm central bore hole, meshed directly with Gear 1. - Gear 3 (Output on Shaft 3): 50 teeth, with an 8 mm central bore hole, meshed directly with Gear 2, ensuring the output rotation matches the input motor direction through the dual-stage reversal.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate length, X | 120 mm | 40 – 200 |
| Plate width, Y | 80 mm | 30 – 150 |
| Plate thickness | 5 mm | 2 – 15 |
| Corner radius | 4 mm | 0 – 15 |
| Shaft diameter | 8 mm | 4 – 16 |
| Shaft height above plate top | 25 mm | 8 – 60 |
| Input shaft X | -26.5 mm | -58 – 58 |
| Idler shaft X | -8.5 mm | -58 – 58 |
| Output shaft X | 26.5 mm | -58 – 58 |
| Shaft line Y position | 0 mm | -38 – 38 |
| Module | 1 mm | 0.5 – 3 |
| Gear face width | 8 mm | 2 – 20 |
| Input gear teeth | 16 mm | 8 – 64 |
| Idler gear teeth | 20 mm | 8 – 64 |
| Output gear teeth | 50 mm | 8 – 100 |
| Gear bottom above plate top | 2 mm | 0 – 25 |
| Bore clearance over shaft | 0.2 mm | 0.1 – 0.6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
