Plates and panels
Two-Piece Open-Frame Camera Enclosure
- Bounding box
- 126.0 × 58.0 × 20.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- September 20, 2026
Download
Free to download and use. See the terms.
The prompt
That as generated as one file with the two pieces stuck together, I need to individual pieces, as per the requirements, sot there is a top plate and a bottom plate, separate pieces that are screwed together, via upright screws, othewise, how do I insert the PCB and camera inside?
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Length (X) | 58 mm | 40 – 140 |
| Plate Width (Y) | 58 mm | 40 – 140 |
| Plate Thickness | 5 mm | 2 – 12 |
| Corner Fillet Radius | 5 mm | 0 – 12 |
| PCB Footprint | 38 mm | 10 – 70 |
| PCB Hole Inset | 3 mm | 1 – 12 |
| Standoff Diameter | 6 mm | 3 – 14 |
| Standoff Height | 5 mm | 1 – 25 |
| PCB Hole Diameter | 2 mm | 0.5 – 5 |
| Enclosure Height | 20 mm | 8 – 60 |
| Top Plate Thickness | 3 mm | 1 – 10 |
| Corner Pillar Size | 8 mm | 4 – 20 |
| Lens Cutout Diameter | 25 mm | 6 – 40 |
| Screw Clearance Hole | 3.2 mm | 1.5 – 8 |
| Screw Pilot Hole | 2.5 mm | 1 – 6 |
| Pilot Hole Depth | 4 mm | 1 – 10 |
| Gap Between Pieces | 10 mm | 2 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Orbital Launch Vehicle Display Model
Highly detailed, realistic non-functional space-launch rocket display model for 3D printing: 240 mm tall, 34 mm max diameter, tapered interstage, ogive nose, fairing seam, service