Gears and transmission
Twin-Shaft Shredder & Hopper
- Bounding box
- 360 × 320 × 358 mm
- Engine
- 3D Printing B-rep
- Parameters
- 20
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
1. Twin-Shaft Shredder & Hopper "A rectangular steel shredder box, 360 mm long, 320 mm wide, and 180 mm tall, with an open top and bottom. Inside are two parallel horizontal shafts spaced 130 mm apart, each fitted with seven circular toothed cutting blades. On top is an angled side-entry feed hopper, and underneath is a rectangular angled discharge chute." 2. Water Wheel Washing Tank & Strainer Basket "An open-top rectangular stainless steel water tank, 520 mm long, 450 mm wide, and 340 mm high. Mounted horizontally across the top center is a central axle shaft with six flat rectangular paddle blades forming a 340 mm diameter water wheel. Resting on the bottom inside the tank is a shallow rectangular perforated strainer basket with side handles." 3. 20" × 20" LPG Drying Oven "A square industrial drying oven box measuring 600 mm wide, 600 mm deep, and 500 mm tall, with thick insulated walls, a single hinged front door, and one horizontal perforated mesh shelf inside measuring 500 mm by 500 mm. Extending from the lower back wall is a flexible gas hose connected to a cylindrical vertical LPG tank standing beside the oven." 4. 20" × 20" Hot-Molding Heat Press "A heavy-duty industrial C-frame heat press measuring 600 mm wide, 600 mm deep, and 500 mm tall with thick steel side walls and a flat base. Inside are two flat square heating plates measuring 508 mm by 508 mm facing each other, with a thin square 508 mm by 508 mm open mold frame resting on the bottom plate. Extending vertically through the top bridge is a thick central threaded screw shaft topped with a horizontal T-bar handle." 5. Rear Pulley & Motor Drive System "A horizontal cylindrical electric motor with a flat bottom mounting plate, fitted with a 90 mm grooved pulley on its rear shaft. Connected via a closed loop V-belt are two 130 mm pulleys above it and one 150 mm pulley to the side."
Parameters
| Name | Value | Range |
|---|---|---|
| Housing length | 360 mm | 200 – 600 |
| Housing width | 320 mm | 160 – 500 |
| Housing height | 180 mm | 120 – 300 |
| Wall thickness | 6 mm | 3 – 12 |
| Shaft centre spacing | 130 mm | 60 – 200 |
| Shaft diameter | 20 mm | 10 – 40 |
| Shaft height above housing bottom | 90 mm | 40 – 140 |
| Blade diameter | 100 mm | 60 – 160 |
| Blade thickness | 8 mm | 4 – 20 |
| Blades per shaft | 7 mm | 3 – 12 |
| Tooth depth | 8 mm | 3 – 20 |
| Teeth per blade | 12 mm | 8 – 24 |
| Hopper height | 120 mm | 60 – 250 |
| Hopper top length | 360 mm | 200 – 600 |
| Hopper top width | 260 mm | 120 – 500 |
| Hopper top offset | -30 mm | -100 – 100 |
| Chute height | 60 mm | 30 – 150 |
| Chute outlet length | 220 mm | 100 – 500 |
| Chute outlet width | 180 mm | 80 – 400 |
| Chute outlet offset | 40 mm | -100 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
