3D preview of Twin-Boss Rocker Link with Base Plate
Loading the interactive model…
Interactive 3D model of Twin-Boss Rocker Link with Base Plate

Plates and panels

Twin-Boss Rocker Link with Base Plate

1 views
Bounding box
164.1 × 152.9 × 60 mm
Engine
3D Printing B-rep
Parameters
21
Published
November 17, 2026

Download

Free to download and use. See the terms.

The prompt

Keep the disc, the two bosses and the arms exactly as they are. Replace only the base plate. Dimensions in mm, top view, disc center at (0,0), boss centers at (53.52,-85.65) and (-53.52,-85.65). Plate outline (symmetric about the Y axis): - Top: the arc of the disc circle (radius 41.76) between points (-17.5,37.9) and (17.5,37.9). - Left side: an arc of radius 111.10 centered at (29.06,-62.95), running from (-17.5,37.9) to (-78.05,-92.4). Right side: mirror image, centered at (-29.06,-62.95). - Around each boss: the boss circle of radius 25.45 centered on the boss center, joining the side arc at the points above. - Bottom: subtract from the PLATE ONLY a circle of radius 33.68 centered at (0,-110.79), which is tangent to both boss circles. Do not cut the bosses. Plate Z range: -14.5 to +13.5 (arms are 17 thick, centered at Z=0). Keep all through-holes open. Reply with ONE fenced openscad block containing the whole script and nothing else.

Parameters

NameValueRange
Disc outside diameter83.52 mm20 – 200
Central through-hole diameter28 mm4 – 100
Bolt hole diameter10.1 mm2 – 30
Bolt hole pitch circle diameter53.2 mm10 – 150
Number of bolt holes (40 deg apart)9 mm1 – 24
Disc height above the arm top face20 mm0 – 80
Disc depth below the arm bottom face23 mm0 – 80
Boss outside diameter50.91 mm10 – 150
Boss through-hole diameter25.45 mm2 – 80
Boss centre distance from disc centre101 mm20 – 250
Boss angle either side of vertical32 deg0 – 80
Boss height above arm mid-plane22 mm0 – 80
Boss depth below arm mid-plane16 mm0 – 80
Arm width15 mm4 – 60
Arm thickness17 mm2 – 40
Radius of the 8 arm junction fillets5 mm0.5 – 12
Side arc radius111.1 mm20 – 400
Radius of the bottom notch33.68 mm5 – 150
Plate top above arm mid-plane13.5 mm0 – 60
Plate bottom below arm mid-plane14.5 mm0 – 60
Bed-side edge chamfer1.2 mm0 – 3

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Twin-Boss Rocker Link with Base Plate - Free CAD Model (STEP, STL) | TextoCAD