3D preview of Twin-Boss Rocker Link with Base Plate
Loading the interactive model…
Interactive 3D model of Twin-Boss Rocker Link with Base Plate

Plates and panels

Twin-Boss Rocker Link with Base Plate

1 views
Bounding box
158.0 × 152.9 × 60 mm
Engine
3D Printing B-rep
Parameters
22
Published
November 17, 2026

Download

Free to download and use. See the terms.

The prompt

Keep the current model and add a base plate. Dimensions in mm. Coordinates in top view: disc center at (0,0); boss centers at (53.5, -85.65) and (-53.5, -85.65). Plate outline = convex hull of three circles: radius 41.76 at (0,0), and radius 25.45 at each boss center. Then subtract a circle of radius 33.68 centered at (0, -85.65) to create a concave notch between the bosses. Plate Z range: from -14.5 to +13.5 (arm mid-plane at Z=0, arms 17 thick). Keep the existing disc, bosses and arms, and keep all through-holes open through the plate. Reply with ONE fenced openscad block containing the whole script and nothing else.

Parameters

NameValueRange
Disc outside diameter83.52 mm20 – 200
Central through-hole diameter28 mm4 – 100
Bolt hole diameter10.1 mm2 – 30
Bolt hole pitch circle diameter53.2 mm10 – 150
Number of bolt holes (40 deg apart)9 mm1 – 24
Disc height above the arm top face20 mm0 – 80
Disc depth below the arm bottom face23 mm0 – 80
Boss outside diameter50.91 mm10 – 150
Boss through-hole diameter25.45 mm2 – 80
Boss centre distance from disc centre101 mm20 – 250
Boss angle either side of vertical32 deg0 – 80
Boss height above arm mid-plane22 mm0 – 80
Boss depth below arm mid-plane16 mm0 – 80
Arm width15 mm4 – 60
Arm thickness17 mm2 – 40
Radius of the 8 arm junction fillets5 mm0.5 – 12
Plate radius around the disc centre41.76 mm10 – 120
Plate radius around each boss centre25.45 mm5 – 80
Radius of the concave notch between bosses33.68 mm5 – 80
Plate top above arm mid-plane13.5 mm0 – 60
Plate bottom below arm mid-plane14.5 mm0 – 60
Bed-side edge chamfer1.2 mm0 – 3

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Twin-Boss Rocker Link with Base Plate - Free CAD Model (STEP, STL) | TextoCAD