3D preview of Twin-Boss Rocker Link
Loading the interactive model…
Interactive 3D model of Twin-Boss Rocker Link

Plates and panels

Twin-Boss Rocker Link

1 views
Bounding box
158.0 × 152.9 × 60 mm
Engine
3D Printing B-rep
Parameters
17
Published
November 17, 2026

Download

Free to download and use. See the terms.

The prompt

Create a parametric mechanical part, all dimensions in mm, symmetric about a vertical axis. 1. Central disc: outer diameter 83.52, center through-hole diameter 28. Add 9 through-holes of diameter 10.10 evenly spaced (40° apart) in a circular pattern on a pitch circle diameter of 53.20. Disc extends 20 above and 23 below the mid-plane reference of the arms (total height 60 incl. arm thickness 17). 2. Two cylindrical bosses: outer diameter 50.91, through-hole diameter 25.45. Their centers are 101 from the disc center, placed at 32° to each side of the vertical axis, below the disc. Bosses extend 22 above and 16 below the arm mid-plane reference. 3. Two straight arms, each 15 wide and 17 thick (centered on the mid-plane), connecting the disc center to each boss center. Add 8 fillets where the arms meet the bosses.

Parameters

NameValueRange
Disc outside diameter83.52 mm20 – 200
Central through-hole diameter28 mm4 – 100
Bolt hole diameter10.1 mm2 – 30
Bolt hole pitch circle diameter53.2 mm10 – 150
Number of bolt holes (40 deg apart)9 mm1 – 24
Disc height above the arm top face20 mm0 – 80
Disc depth below the arm bottom face23 mm0 – 80
Boss outside diameter50.91 mm10 – 150
Boss through-hole diameter25.45 mm2 – 80
Boss centre distance from disc centre101 mm20 – 250
Boss angle either side of vertical32 deg0 – 80
Boss height above arm mid-plane22 mm0 – 80
Boss depth below arm mid-plane16 mm0 – 80
Arm width15 mm4 – 60
Arm thickness17 mm2 – 40
Radius of the 8 arm junction fillets5 mm0.5 – 12
Bed-side edge chamfer1.2 mm0 – 3

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Twin-Boss Rocker Link - Free CAD Model (STEP, STL) | TextoCAD