3D preview of Twin-Boom Flying Wing UAV
Loading the interactive model…
Interactive 3D model of Twin-Boom Flying Wing UAV

Plates and panels

Twin-Boom Flying Wing UAV

1 views
Bounding box
1201.0 × 660.8 × 129.6 mm
Engine
3D Printing B-rep
Parameters
23
Published
November 18, 2026

Download

Free to download and use. See the terms.

The prompt

Item Value Wingspan 1200 mm Root / tip chord 380 / 160 mm Leading-edge sweep 28° Wing area / aspect ratio about 0.324 m² / 4.4 Mean aerodynamic chord 285 mm Fuselage 660 mm long, 110 mm wide, 85 mm high Booms at ±230 mm from the centreline, 4 lift motors at the ends Centre of gravity 190 mm behind the wing root leading edge, about 6% static margin Elevons from 150 to 560 mm out, hinged at 75% chord this is the dimension and design of the project can you generate the template for stl file

Parameters

NameValueRange
Wingspan1200 mm600 – 2400
Root chord380 mm150 – 800
Tip chord160 mm60 – 400
Leading-edge sweep28 deg0 – 60
Root thickness (% chord)12 mm6 – 20
Tip thickness (% chord)10 mm5 – 20
Elevon inboard end from CL150 mm40 – 500
Elevon outboard end from CL560 mm100 – 900
Elevon chord70 mm25 – 150
Elevon thickness8 mm3 – 20
Pod overall length660 mm200 – 1200
Pod maximum width110 mm40 – 250
Pod maximum height85 mm30 – 200
Nose overhang ahead of wing LE150 mm20 – 400
Boom offset from centreline230 mm60 – 500
Boom tube length620 mm250 – 1000
Boom tube outside diameter20 mm8 – 40
Front boom end, +Y = forward150 mm0 – 400
Motor mount length along boom40 mm20 – 80
Motor mount width40 mm20 – 80
Motor mounting plate thickness8 mm4 – 20
M3 motor hole pitch19 mm10 – 30
M3 clearance hole diameter3.4 mm2 – 5

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Twin-Boom Flying Wing UAV - Free CAD Model (STEP, STL) | TextoCAD