Plates and panels
TILT-X1 Wing, Ailerons and Tilt Nacelles
- Bounding box
- 218 × 1199.3 × 43.9 mm
- Engine
- 3D Printing B-rep
- Parameters
- 6
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
TILT-X1 twin tilt-rotor VTOL: 1200 mm wing split into printable panels with carbon spar, hinged ailerons, tilt-servo wing-tip pods and tilting motor nacelles.
Parameters
| Name | Value | Range |
|---|---|---|
| Wing chord | 200 mm | 160 – 220 |
| Carbon spar tube outer diameter | 10 mm | 8 – 12 |
| Nacelle tilt: 0 = hover, 90 = forward flight | 90 mm | 0 – 90 |
| Gap between hinge knuckles | 0.5 mm | 0.3 – 0.9 |
| Hinge pin hole for 1.75 mm filament | 2 mm | 1.8 – 2.4 |
| Socket clearance per side | 0.2 mm | 0.1 – 0.4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Enclosure with Camera Lens & Sun Visor
On the orange front faceplate piece, cut a 15mm circular hole centered horizontally in the upper third section for a camera lens aperture. Directly above this circular hole, projec
Foldable Emergency Rescue Stretcher
Create an editable 3D CAD model of a foldable emergency rescue stretcher matching the reference image. Dimensions: 2100 × 550 mm. Use two parallel silver aluminum tube rails, four