Gears and transmission
TILT-X1 Light Fuselage 75pct v5
- Bounding box
- 643.8 × 312 × 194.3 mm
- Engine
- 3D Printing B-rep
- Parameters
- 9
- Published
- November 7, 2026
Download
Free to download and use. See the terms.
The prompt
TILT-X1 fuselage, tail, gear and trays at adjustable scale (default 75%): thin shell, hollow ribbed tail surfaces, real-size screw, servo and motor features.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall airframe scale (1.0 = original size); use the same value as the wing set | 0.75 mm | 0.6 – 1 |
| Fuselage shell thickness | 0.8 mm | 0.8 – 3 |
| Fin thickness ratio (thicker fin holds the rudder servo) | 0.2 mm | 0.12 – 0.24 |
| Skin thickness of hollow tail parts | 0.6 mm | 0.5 – 2 |
| Spacing of internal ribs | 60 mm | 30 – 90 |
| Rib thickness | 0.8 mm | 0.5 – 1.5 |
| Gap between hinge knuckles | 0.5 mm | 0.3 – 0.9 |
| Hinge pin / elevator torque rod hole, 2 mm rod or 1.75 mm filament | 2 mm | 1.8 – 2.4 |
| Socket clearance per side | 0.2 mm | 0.1 – 0.4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.