Everything else
Three Water Rocket Proposals
- Bounding box
- 440.1 × 285.0 × 400.2 mm
- Engine
- Precision B-rep
- Parameters
- 29
- Published
- September 12, 2026
Download
Free to download and use. See the terms.
The prompt
dame 3 planos como propuesta para mi clase de física, para hacer un hidro - cohete de material reciclado con estas especificaciones: Clear visual representations including side view, front/rear view, approximate dimensions (length, diameter), fin count/shape/position, and nose cone profile. Include a safe launch base design that allows angle control, Materials List: Specific components required for construction, Design Characteristics: Summary of physical structure and geometry, Physics Justification: Apply at least 3 physics concepts (e.g., projectile motion, air resistance/drag, momentum, center of pressure, pressure/thrust, stability) explaining how the design maximizes horizontal range, Expected Performance: Predicted range, height (≤ 1m constraint compliance), flight stability, key advantages, and potential drawbacks. Haz el plano en ingles
Parameters
| Name | Value | Range |
|---|---|---|
| Layout gap X | 120 mm | 50 – 300 |
| Nose tip diameter | 2 mm | 0.5 – 10 |
| P1 body length | 300 mm | 100 – 600 |
| P1 body diameter | 90 mm | 30 – 150 |
| P1 nose height | 80 mm | 30 – 200 |
| P1 fin count | 3 mm | 3 – 6 |
| P1 fin root length | 100 mm | 40 – 200 |
| P1 fin tip length | 70 mm | 20 – 150 |
| P1 fin span | 90 mm | 30 – 200 |
| P1 fin thickness | 3 mm | 1 – 10 |
| P1 fin mount above nozzle | 20 mm | 0 – 100 |
| P2 body length | 280 mm | 100 – 600 |
| P2 body diameter | 85 mm | 30 – 150 |
| P2 nose height | 100 mm | 30 – 200 |
| P2 fin count | 4 mm | 3 – 6 |
| P2 fin root length | 110 mm | 40 – 200 |
| P2 fin tip length | 75 mm | 20 – 150 |
| P2 fin span | 100 mm | 30 – 200 |
| P2 fin thickness | 2 mm | 1 – 10 |
| P2 fin mount above nozzle | 25 mm | 0 – 100 |
| P3 body length | 310 mm | 100 – 600 |
| P3 body diameter | 90 mm | 30 – 150 |
| P3 nose height | 90 mm | 30 – 200 |
| P3 fin count | 3 mm | 3 – 6 |
| P3 fin root length | 95 mm | 40 – 200 |
| P3 fin tip length | 65 mm | 20 – 150 |
| P3 fin span | 85 mm | 30 – 200 |
| P3 fin thickness | 2 mm | 1 – 10 |
| P3 fin mount above nozzle | 15 mm | 0 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like