Plates and panels
Three-Compartment Electrolysis Cell
- Bounding box
- 423.5 × 100.0 × 100.0 mm
- Engine
- Precision B-rep
- Parameters
- 29
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Three-compartment PETG electrolysis cell for Na₂SO₄. Linear sandwich: Anode (60x60x50mm) | Center (40x60x50mm) | Cathode (60x60x50mm). Overall: 220x100x80mm. Features: 6mm vent ports top, 4mm inlet/outlet ports, 8mm pH probe ports, vertical electrode slots (50x50x1mm), membrane frames with O-ring grooves (70x70mm outer, 50x50mm inner), AEM between anode/center, CEM between center/cathode. End plates 100x80x5mm with nut recesses. Four M5 through-bolts. PETG, 0.2mm layer, 255°C nozzle, no supports, 40% gyroid infill, 4 walls, 5 top/bottom layers. Total dimensions fit Bambu P1S (256mm max). Sand sealing surfaces, use silicone gaskets, tighten to 2 N·m.
Parameters
| Name | Value | Range |
|---|---|---|
| End plate width | 100 mm | 80 – 150 |
| End plate height | 80 mm | 60 – 120 |
| End plate thickness | 5 mm | 3 – 10 |
| Bolt hole clearance | 5.5 mm | 5.1 – 7 |
| Bolt hole X offset from edge | 10 mm | 5 – 20 |
| Bolt hole Y offset from edge | 10 mm | 5 – 20 |
| Nut recess depth | 3 mm | 2 – 5 |
| Anode interior length | 60 mm | 30 – 100 |
| Anode interior width | 60 mm | 30 – 100 |
| Anode interior height | 50 mm | 30 – 100 |
| Wall thickness | 3 mm | 1.5 – 6 |
| Electrode slot width | 50 mm | 30 – 80 |
| Electrode slot height | 50 mm | 30 – 80 |
| Electrode slot depth | 1 mm | 0.5 – 3 |
| Vent port diameter | 6 mm | 3 – 10 |
| Inlet/outlet port diameter | 4 mm | 2 – 8 |
| Center interior length | 40 mm | 20 – 80 |
| Center interior width | 60 mm | 30 – 100 |
| Center interior height | 50 mm | 30 – 100 |
| pH probe port diameter | 8 mm | 4 – 12 |
| Membrane frame outer size | 70 mm | 50 – 90 |
| Membrane frame inner size | 50 mm | 30 – 70 |
| Membrane frame thickness | 5 mm | 2 – 8 |
| Bolt diameter | 5 mm | 3 – 8 |
| Bolt length | 200 mm | 150 – 250 |
| Head across flats | 8 mm | 5 – 13 |
| Head thickness | 4 mm | 2 – 6 |
| Nut across flats | 8 mm | 5 – 13 |
| Nut thickness | 4 mm | 2 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Orbital Launch Vehicle Display Model
Highly detailed, realistic non-functional space-launch rocket display model for 3D printing: 240 mm tall, 34 mm max diameter, tapered interstage, ogive nose, fairing seam, service