Gears and transmission
Threaded Neck and Screw Cap (2-part)
- Bounding box
- 57.0 × 25.0 × 15.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Create TWO separate solid CAD parts: an externally threaded cylindrical neck and a matching screw cap. IMPORTANT: The neck MUST have a clearly visible CONTINUOUS HELICAL EXTERNAL THREAD on its OUTER surface. Do NOT make horizontal rings. Do NOT leave the neck smooth. PART 1 — NECK Create a hollow cylindrical neck: - Outer diameter: 20 mm - Outer radius: 10 mm - Total height: 15 mm - Wall thickness: 1.5 mm - Inner diameter: 17 mm Thread: - External thread on the OUTSIDE of the neck - Continuous helical thread - Thread pitch: 2 mm - Thread depth: 0.6 mm - Threaded length: 8 mm - Start the thread 1 mm below the top edge - Leave the bottom 7 mm completely smooth - Add a 0.5 mm chamfer to the top edge - The bottom face must be flat and suitable for Boolean Union with another solid in Rhino. PART 2 — CAP Create a separate compact screw cap that fits OVER the outside of the neck. - Internal helical thread matching the external neck thread - Internal thread must engage with the neck thread - Clearance between mating thread surfaces: 0.3–0.4 mm - Cap height: 10–12 mm - Cap wall thickness: 2 mm - Closed top - Rounded outer edges - Compact cylindrical form - Add a small internal sealing surface - The cap should screw onto the neck smoothly by hand. IMPORTANT: - The neck and cap must be TWO separate solid bodies. - The cap must NOT be a large open cup. - The neck must visibly have an EXTERNAL screw thread. - Do not create any bottle or additional body. - Do not use gears, springs, or other mechanisms. - Keep the overall diameter close to 24–26 mm. - The design must be suitable for importing into Rhino 3D. - Export as STEP (.STEP/.STP).
Parameters
| Name | Value | Range |
|---|---|---|
| Neck Outer Diameter | 20 mm | 10 – 60 |
| Neck Inner Diameter | 17 mm | 4 – 56 |
| Neck Height | 15 mm | 8 – 60 |
| Top Edge Chamfer | 0.5 mm | 0.1 – 2 |
| Thread Pitch | 2 mm | 0.5 – 6 |
| Thread Depth | 0.6 mm | 0.2 – 2 |
| External Thread Length | 8 mm | 2 – 40 |
| Thread Top Offset | 1 mm | 0 – 10 |
| Cap Outer Diameter | 25 mm | 12 – 70 |
| Cap Height | 11 mm | 6 – 40 |
| Cap Top Wall Thickness | 2 mm | 0.8 – 8 |
| Internal Thread Length | 7 mm | 2 – 30 |
| Mating Thread Clearance | 0.35 mm | 0.05 – 1.5 |
| Rounded Outer Edge Radius | 1 mm | 0.1 – 4 |
| Sealing Plug Diameter | 16.4 mm | 4 – 55 |
| Sealing Plug Height | 2 mm | 0.5 – 10 |
| Exploded Layout Gap | 12 mm | 2 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
