Everything else
Thin-Wall Jar Container Liner
- Bounding box
- 89.7 × 89.6 × 90.1 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- September 14, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a single, seamless, rotationally symmetrical container liner designed for injection molding. Total height is 90mm. The main body is a cylinder with a constant outside diameter of 74.5mm and an ultra-thin wall thickness of 1.1mm. The bottom of the cylinder transitions into a smooth, fully filleted dome cap with a radius matching the cylinder. At the top opening, create a reinforced, rigid collar with a height of 10mm and a wall thickness of 2.5mm. The outside diameter of the top collar is 89.5mm to act as a wide overhang lip that rests over a 3.5-inch jar opening. Transition the 2.5mm thick top collar down into the 1.1mm thin body using a gradual, continuous internal chamfer taper to prevent stress concentrations. Export the final model as a clean, watertight parametric STEP file
Parameters
| Name | Value | Range |
|---|---|---|
| Total Height | 90 mm | 50 – 200 |
| Body Outside Diameter | 74.5 mm | 20 – 200 |
| Body Wall Thickness | 1.1 mm | 0.6 – 6 |
| Collar Outside Diameter | 89.5 mm | 25 – 250 |
| Collar Wall Thickness | 2.5 mm | 0.8 – 10 |
| Collar Height | 10 mm | 3 – 30 |
| Body-to-Collar Taper Height | 10 mm | 2 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like