Plates and panels
Thin Plate with Arc Slot and Tick Marks
- Bounding box
- 120.0 × 55.0 × 1.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- September 5, 2026
Download
Free to download and use. See the terms.
The prompt
Create a thin flat plate, 120mm long (X), 55mm wide (Y), 1mm thick. Add 2 through-holes of 4.3mm diameter at X = +54mm and X = -54mm, centered on Y axis, matching the base plate holes. Cut a slot/window following a circular arc: radius 74.5mm, arc length 104mm, centered at X=0, concave side up, 6mm wide, to expose the tube underneath. Add radial tick marks along a concentric arc offset 8mm outward (radius ≈82.5mm) from the channel arc: one tick every 5 degrees from -40° to +40°, with longer ticks every 10 degrees. Add number labels (0, 10, 20, 30, 40) at every 10-degree mark, mirrored on both sides of center.
Parameters
| Name | Value | Range |
|---|---|---|
| Length (X) | 120 mm | 50 – 200 |
| Width (Y) | 55 mm | 20 – 100 |
| Thickness (Z) | 1 mm | 0.5 – 5 |
| Hole Diameter | 4.3 mm | 2 – 10 |
| Hole X Offset from Center | 54 mm | 10 – 60 |
| Slot Arc Radius | 74.5 mm | 50 – 100 |
| Slot Width | 6 mm | 2 – 20 |
| Slot Arc Length | 104 mm | 50 – 150 |
| Tick Radius Offset | 8 mm | 2 – 20 |
| Tick Angle Start (deg) | -40 deg | -90 – 0 |
| Tick Angle End (deg) | 40 deg | 0 – 90 |
| Tick Step (deg) | 5 deg | 1 – 10 |
| Short Tick Length | 2 mm | 1 – 5 |
| Long Tick Length | 4 mm | 2 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con