Plates and panels
TEWC-4241 Hopper-feed Screw Pump | GA CAD assembly
- Bounding box
- 1855.0 × 325.0 × 332.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
CAD reconstruction from two uploaded TEWC-4241 GA and foundation drawings. 1855 mm overall; 1520 x 325 mm base; discharge Ø65; top suction hopper labelled 200 mm; internally screw-fed pump; motor 3.7kW 1440rpm B5. Separate inspection components; undimensioned parts approximated.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall assembly length | 1855 mm | 1840 – 2050 |
| Skid length | 1520 mm | 1510 – 1600 |
| Skid width | 325 mm | 315 – 350 |
| Base platform height | 75 mm | 60 – 95 |
| Pump centreline height | 235 mm | 220 – 245 |
| Stator OD | 112 mm | 110 – 125 |
| Stator length | 410 mm | 400 – 425 |
| Delivery nominal bore | 65 mm | 60 – 75 |
| Feed casing OD (estimated) | 160 mm | 150 – 175 |
| Feed section length (estimated) | 450 mm | 435 – 460 |
| Hopper top opening length (estimated) | 350 mm | 340 – 365 |
| Hopper top width | 180 mm | 175 – 195 |
| Hopper max elevation | 332 mm | 330 – 350 |
| Motor body region length (estimated) | 305 mm | 295 – 315 |
| Motor body OD (estimated) | 150 mm | 145 – 160 |
| Foundation anchor bolt diameter | 12.7 mm | 12 – 14 |
| Longitudinal anchors pitch | 600 mm | 595 – 605 |
| Transverse anchor pitch | 290 mm | 285 – 295 |
| Feed screw pitch (illustrative) | 95 mm | 85 – 105 |
| Feed screw diameter (illustrative) | 132 mm | 125 – 138 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Foldable Emergency Rescue Stretcher
Create an editable 3D CAD model of a foldable emergency rescue stretcher matching the reference image. Dimensions: 2100 × 550 mm. Use two parallel silver aluminum tube rails, four
Enclosure with Camera Lens & Sun Visor
On the orange front faceplate piece, cut a 15mm circular hole centered horizontally in the upper third section for a camera lens aperture. Directly above this circular hole, projec