Gears and transmission
Ten-Tooth Spur Gear
- Bounding box
- 60 × 58.9 × 14 mm
- Engine
- 3D Printing B-rep
- Parameters
- 6
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
take this gear and reduce the amount of teeth on it to 10
Parameters
| Name | Value | Range |
|---|---|---|
| Number of teeth | 10 mm | 6 – 40 |
| Outer diameter across tooth tips | 60 mm | 20 – 200 |
| Root diameter between teeth | 44 mm | 10 – 190 |
| Gear thickness | 14 mm | 3 – 40 |
| Shaft bore diameter, 0 = solid | 8 mm | 0 – 30 |
| Chamfer on top/bottom edges | 1 mm | 0 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.