Gears and transmission
TC Inline-6 Racing Engine Assembly
- Bounding box
- 748.0 × 565.4 × 769.0 mm
- Engine
- Precision B-rep
- Parameters
- 53
- Published
- November 21, 2026
Download
Free to download and use. See the terms.
The prompt
Create a detailed, realistic 3D CAD model of an Argentine Turismo Carretera (TC) inline-six racing engine, based strictly on the attached reference image. Carefully analyze the image and reproduce the engine as accurately as possible, preserving its geometry, proportions, component positions, and mechanical details. Main components: Inline 6-cylinder engine block with metallic gray finish. Long red valve cover matching the reference. Four vertical intake trumpets and throttle bodies. Six curved tubular exhaust headers with collector. Front pulleys, gears, belts, and accessory housings. Black lower crankcase and metallic oil sump. Visible bolts, brackets, flanges, and mechanical connections. CAD requirements: Full-scale 3D solid model in millimeters. Accurate proportions based on the reference image. Separate solid bodies for major components. Realistic mechanical geometry with smooth curves and detailed surfaces. Parametric and editable CAD geometry. Exportable as STEP (.step) for SolidWorks. IMPORTANT: Prioritize faithfully reproducing the exact engine shown in the attached image. Do not generate a generic engine or simplify its distinctive components. Approximate hidden details while maintaining realistic mechanical proportions.
Parameters
| Name | Value | Range |
|---|---|---|
| Block Length | 620 mm | 400 – 900 |
| Block Width | 220 mm | 150 – 320 |
| Block Height | 240 mm | 150 – 350 |
| Crankcase Length | 600 mm | 380 – 880 |
| Crankcase Width | 230 mm | 150 – 330 |
| Crankcase Height | 90 mm | 40 – 180 |
| Sump Length | 480 mm | 300 – 800 |
| Sump Width | 200 mm | 120 – 300 |
| Sump Height | 110 mm | 50 – 220 |
| Cylinder Head Length | 640 mm | 400 – 900 |
| Cylinder Head Width | 230 mm | 150 – 330 |
| Cylinder Head Height | 110 mm | 60 – 200 |
| Valve Cover Length | 600 mm | 380 – 880 |
| Valve Cover Width | 180 mm | 100 – 280 |
| Valve Cover Height | 90 mm | 40 – 180 |
| Valve Cover Corner Radius | 10 mm | 0 – 25 |
| Valve Cover Rib Count | 7 | 0 – 12 |
| Valve Cover Bolt Diameter | 6 mm | 3 – 12 |
| Throttle Body Count | 4 | 2 – 6 |
| Throttle Body Spacing | 130 mm | 60 – 250 |
| Throttle Body Diameter | 62 mm | 30 – 110 |
| Throttle Body Height | 90 mm | 30 – 180 |
| Throttle Body Flange Diameter | 90 mm | 40 – 160 |
| Trumpet Bottom Diameter | 52 mm | 20 – 100 |
| Trumpet Top Diameter | 70 mm | 20 – 130 |
| Trumpet Height | 90 mm | 20 – 200 |
| Intake Runner Diameter | 42 mm | 20 – 80 |
| Header Count | 6 | 4 – 8 |
| Header Tube Diameter | 44 mm | 20 – 80 |
| Header Rise Above Head | 90 mm | 10 – 220 |
| Header Sweep Back | 170 mm | 60 – 320 |
| Collector Diameter | 90 mm | 40 – 180 |
| Collector Length | 200 mm | 60 – 400 |
| Tail Pipe Length | 140 mm | 30 – 300 |
| Header Flange Size | 60 mm | 20 – 120 |
| Crank Pulley Diameter | 180 mm | 80 – 320 |
| Crank Pulley Width | 40 mm | 15 – 90 |
| Auxiliary Pulley Count | 2 | 1 – 4 |
| Auxiliary Pulley Diameter | 100 mm | 40 – 200 |
| Auxiliary Pulley Width | 30 mm | 10 – 70 |
| Timing Gear Module | 4 mm | 1 – 8 |
| Timing Gear Teeth | 44 | 20 – 70 |
| Timing Gear Width | 24 mm | 8 – 50 |
| Timing Gear Bore | 30 mm | 10 – 60 |
| Lightening Hole Count | 5 | 1 – 8 |
| Lightening Hole Diameter | 18 mm | 6 – 40 |
| Belt Loop Span Y | 260 mm | 120 – 450 |
| Belt Loop Span Z | 420 mm | 150 – 600 |
| Belt Width | 30 mm | 10 – 60 |
| Belt Thickness | 8 mm | 3 – 20 |
| Alternator Diameter | 110 mm | 60 – 180 |
| Alternator Length | 70 mm | 40 – 140 |
| Bracket Thickness | 12 mm | 4 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
