Plates and panels
Tapered Wedge Plate
- Bounding box
- 105 × 40 × 12 mm
- Engine
- 3D Printing B-rep
- Parameters
- 6
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
Wedge plate 105 mm long and 40 mm wide. Thickness tapers along 105 mm length from 1 mm at one end to 12 mm at the other end. Three 6.5 mm through holes in one row, 16 mm from one long edge, and 21, 52.5 and 84 mm along the length.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate length along X | 105 mm | 50 – 300 |
| Plate width along Y | 40 mm | 20 – 200 |
| Thickness at thin end | 1 mm | 0.5 – 10 |
| Thickness at thick end | 12 mm | 2 – 30 |
| Hole diameter | 6.5 mm | 1 – 15 |
| Distance from long edge | 16 mm | 5 – 35 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Enclosure with Camera Lens & Sun Visor
On the orange front faceplate piece, cut a 15mm circular hole centered horizontally in the upper third section for a camera lens aperture. Directly above this circular hole, projec
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm