Organic and sculpted
Tangent Ogive Nose Cone
- Bounding box
- 120.0 × 104.1 × 66.8 mm
- Engine
- Organic B-rep
- Parameters
- 0
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a solid 3D B-rep nose cone utilizing a tangent ogive curve layout. The total length of the component along the X-axis is 450mm. The base of the nose cone at X=450mm must be a vertical oval profile with a total width (Y-axis) of 200mm and a total height (Z-axis) of 125mm. The apex of the nose cone at X=0mm must terminate at a sharp point. The profile must scale down perfectly smoothly from the oval base to the sharp tip without any surface discontinuities.
Parameters
This model was generated without adjustable parameters. Open it in the editor to add your own dimensions.
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox