Plates and panels
Table Robot - Exploded Multi-Part Model
- Bounding box
- 1480.0 × 300.1 × 332.5 mm
- Engine
- Precision B-rep
- Parameters
- 83
- Published
- August 9, 2026
Download
Free to download and use. See the terms.
The prompt
Design one table robot with these spectsI want the design to include head rotation, tilting, and nodding; neck circulation; arm and hand movements; body rotation and tilting; and base configuration options. All major parts should be provided as separate STEP files, including different load-bearing structures, different base configurations, different middle sections, and different head configurations. The component arrangement should be modular and organized as: head → neck → torso → arms → base. All major components should have proper placement and integration within their respective sections. The panels should be easily accessible for assembly, inspection, and maintenance. The overall design should be modular and allow straightforward component replacement. Any damaged component should be easy to remove, repair, or replace without requiring major disassembly of the entire system.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 50 mm | 20 – 200 |
| Circular Base Diameter | 300 mm | 150 – 500 |
| Thickness | 15 mm | 5 – 30 |
| Bolt Count | 6 | 3 – 12 |
| Bolt Hole Dia | 8 mm | 4 – 20 |
| Bolt Circle Dia | 250 mm | 100 – 400 |
| Rectangular Base Length | 280 mm | 100 – 500 |
| Width | 200 mm | 100 – 400 |
| Thickness | 15 mm | 5 – 30 |
| Bolt Hole Dia | 8 mm | 4 – 20 |
| Bolt Edge Offset | 25 mm | 10 – 80 |
| Tripod Mount Circle Dia | 250 mm | 100 – 400 |
| Thickness | 15 mm | 5 – 30 |
| Central Hub Dia | 80 mm | 30 – 150 |
| Leg Width | 30 mm | 10 – 60 |
| Mount Bolt Dia | 8 mm | 4 – 15 |
| Turntable Diameter | 200 mm | 100 – 350 |
| Height | 40 mm | 20 – 80 |
| Central Bore Dia | 10 mm | 5 – 30 |
| Lower Torso Width (X) | 180 mm | 100 – 300 |
| Depth (Y) | 180 mm | 100 – 300 |
| Height (Z) | 120 mm | 60 – 200 |
| Tilt Pivot Hole Dia | 15 mm | 5 – 25 |
| Spine Column Width | 40 mm | 20 – 80 |
| Depth | 40 mm | 20 – 80 |
| Height | 300 mm | 100 – 500 |
| Flange Side Length | 80 mm | 40 – 120 |
| Flange Thickness | 10 mm | 5 – 20 |
| Front/Rear Panel Width | 200 mm | 100 – 300 |
| Height | 250 mm | 100 – 400 |
| Thickness | 3 mm | 1 – 6 |
| Upper Torso Width | 220 mm | 120 – 300 |
| Depth | 120 mm | 80 – 200 |
| Total Height | 180 mm | 100 – 250 |
| Base Thickness | 15 mm | 10 – 30 |
| Side Wall Thickness | 20 mm | 10 – 40 |
| Shoulder Pivot Hole Dia | 10 mm | 5 – 20 |
| Neck Diameter | 60 mm | 30 – 100 |
| Total Height | 80 mm | 40 – 120 |
| Head Plate Length | 120 mm | 80 – 160 |
| Width | 90 mm | 60 – 120 |
| Thickness | 8 mm | 4 – 15 |
| Bolt Hole Dia | 6 mm | 3 – 10 |
| Bolt Margin | 10 mm | 5 – 20 |
| Sensor Head Width | 140 mm | 100 – 180 |
| Depth | 120 mm | 80 – 150 |
| Height | 100 mm | 60 – 130 |
| Sensor Protrusion Dia | 30 mm | 15 – 50 |
| Protrusion Length | 20 mm | 10 – 40 |
| Screen Head Width | 140 mm | 100 – 180 |
| Depth | 120 mm | 80 – 150 |
| Height | 100 mm | 60 – 130 |
| Screen Pocket Width | 100 mm | 60 – 130 |
| Pocket Height | 70 mm | 40 – 90 |
| Pocket Depth | 5 mm | 2 – 10 |
| Plain Head Width | 140 mm | 100 – 180 |
| Depth | 120 mm | 80 – 150 |
| Height | 100 mm | 60 – 130 |
| Shoulder Width | 80 mm | 50 – 100 |
| Shoulder Depth | 80 mm | 50 – 100 |
| Shoulder Height | 100 mm | 60 – 150 |
| Upper Arm Length | 200 mm | 80 – 300 |
| Upper Arm Diameter | 40 mm | 20 – 60 |
| Elbow Size | 40 mm | 20 – 60 |
| Forearm Length | 200 mm | 80 – 300 |
| Forearm Diameter | 30 mm | 15 – 50 |
| Wrist Width | 40 mm | 20 – 50 |
| Wrist Depth | 40 mm | 20 – 50 |
| Wrist Height | 40 mm | 20 – 50 |
| Gripper Length | 80 mm | 40 – 100 |
| Width | 50 mm | 30 – 70 |
| Height | 30 mm | 20 – 50 |
| Finger Length | 20 mm | 10 – 30 |
| Finger Diameter | 8 mm | 4 – 12 |
| Suction Cup Length | 80 mm | 40 – 100 |
| Width | 50 mm | 30 – 70 |
| Height | 30 mm | 20 – 50 |
| Cup Diameter | 25 mm | 15 – 40 |
| Cup Length | 15 mm | 8 – 25 |
| Pen Holder Length | 80 mm | 40 – 100 |
| Width | 50 mm | 30 – 70 |
| Height | 30 mm | 20 – 50 |
| Pen Hole Dia | 10 mm | 5 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con