Gears and transmission
Surgical Quick-Release Chuck
- Bounding box
- 28.0 × 28.0 × 40.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Model a simplified quick-release chuck for a surgical power tool as a single solid part. Units: mm. Material: 17-4PH stainless steel. Origin at the centre of the rear face of the rear spigot; axis along +Z. Rear spigot (Z 0 to Z 10): cylinder diameter 12. In its rear face, cut a D-shaped socket 5 mm diameter with one flat at 4.5 mm across, 8 mm deep, for the gearbox output shaft. Main body (Z 10 to Z 40): cylinder diameter 28, length 30. Add a 1 mm x 45 degree chamfer on both outer edges. Front socket: from the front face (Z 40), cut a double-D socket that matches an 8 mm shaft with two flats 6.5 mm across: an 8.05 mm diameter bore with two flats 6.55 mm apart, 27 mm deep. Add a 0.5 mm chamfer at the socket mouth. Ball detents: two radial holes, 3 mm diameter, at Z 32 (8 mm behind the front face), opposite each other along the Y axis, running from the outer surface into the socket. These hold 3 mm steel balls (not modelled). Around the main body, add a 1.5 mm wide x 1 mm deep groove at Z 32 to hold a retaining spring ring over the ball holes.
Parameters
| Name | Value | Range |
|---|---|---|
| Rear spigot diameter | 12 mm | 6 – 20 |
| Rear spigot length | 10 mm | 4 – 20 |
| Rear D-socket diameter | 5 mm | 2 – 12 |
| Rear D-socket across flat | 4.5 mm | 1.5 – 11.5 |
| Rear D-socket depth | 8 mm | 2 – 15 |
| Main body diameter | 28 mm | 15 – 50 |
| Main body length | 30 mm | 10 – 60 |
| Body edge chamfer | 1 mm | 0 – 2 |
| Front socket bore diameter | 8.05 mm | 4 – 20 |
| Front double-D across flats | 6.55 mm | 3 – 18 |
| Front socket depth | 27 mm | 5 – 30 |
| Socket mouth chamfer | 0.5 mm | 0 – 1.5 |
| Ball detent hole diameter | 3 mm | 1 – 6 |
| Ball detent Z position | 32 mm | 5 – 70 |
| Retaining groove width | 1.5 mm | 0.5 – 5 |
| Retaining groove depth | 1 mm | 0.2 – 3 |
| Retaining groove Z position | 32 mm | 5 – 70 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
