Gears and transmission
Sumo Robot Trapezoid Chassis Base
- Bounding box
- 200.0 × 180.0 × 4.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Create Version 1 of a parametric CAD chassis base for an educational two-wheel-drive sumo robot. BASE GEOMETRY: - Isosceles trapezoid. - Front width: 200 mm. - Rear width: 130 mm. - Length: 180 mm. - Symmetrical design. - Flat base plate. - Rounded corners. ELECTRONICS: - Arduino UNO R3, 68.6 x 53.4 mm. - L298N motor driver, reference PCB size 43 x 43 mm. - Four-AA battery holder, approximate reference envelope 63 x 58 x 16 mm. DRIVE SYSTEM: - Two yellow TT geared DC motors. - Two compatible yellow robot wheels. - Reference wheel diameter: 65 mm. - Motor mounting brackets must be adjustable. - Do not assume exact motor mounting hole positions. LAYOUT: - Arduino near the center. - L298N near the motors. - Battery holder near the centerline. - Motors symmetrically positioned on both sides. - Wheels must remain outside the base plate. - Provide sufficient clearance for wheel rotation. MANUFACTURING: - Keep the entire base inside a 200 x 200 mm footprint. - Include rounded edges. - Use configurable mounting slots. - Provide cable routing openings. - Avoid unnecessary material. - Keep the base suitable for FDM 3D printing and flat-sheet laser cutting. IMPORTANT: This is a preliminary dimensional model. Do not create final component mounting holes where dimensions are unknown. Use adjustable slots and configurable mounting parameters. OUTPUT: - Parametric editable CAD. - Top view. - Bottom view. - Isometric view. - STL, STEP and DXF exports if supported.
Parameters
| Name | Value | Range |
|---|---|---|
| Front width | 200 mm | 100 – 200 |
| Rear width | 130 mm | 60 – 200 |
| Length | 180 mm | 80 – 200 |
| Plate thickness | 4 mm | 2 – 10 |
| Rounded edge radius | 0.8 mm | 0 – 1.5 |
| Motor slot length | 14 mm | 5 – 30 |
| Motor slot width | 3.2 mm | 2 – 6 |
| Motor slot inboard from side edge | 12 mm | 4 – 30 |
| Motor slot group Y center | -20 mm | -80 – 80 |
| Motor slot pair spacing | 30 mm | 10 – 60 |
| Cable slot length | 30 mm | 10 – 60 |
| Cable slot width | 8 mm | 3 – 20 |
| Cable slot group Y offset | -40 mm | -85 – 40 |
| Cable slot spacing | 35 mm | 10 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
