STI Shifter Hood with Apex Disc Bell

"Professional product photography, studio lighting, minimalist white background. Close-up of a road bike STI shifter/brake lever hood (Shimano Dura-Ace style, matte black textured rubber) with a thin, low-profile flat disc bell mounted at the very apex/peak tip of the hood's rear horn — the highest, rearmost point of the hood, not on the front curve or palm-contact zone. The disc bell is clearly a separate add-on accessory, distinct from the hood via a subtle parting line and a satin anodized aluminum or matte metal finish contrasting with the textured rubber hood. Disc diameter roughly 35-40mm, thickness only a few millimeters, projecting no more than 5-8mm above the horn's peak. The disc sits on a small central raised post with a visible air gap between the disc's outer rim and the hood surface, so the rim can resonate freely — not flush-mounted or glued flat. A small spring-loaded striker sits recessed beside the post and flicks upward against the underside of the disc's rim when a thumb-operated lever is pressed, reachable without removing the hand from the hoods. Attached via a narrow, low-profile precision wrap-around clamp positioned only around the base/rear of the hood, away from the brake lever pivot and finger reach zone — not a wide diagonal strap. Sleek, minimal, high-end cycling component aesthetic, realistic materials (anodized aluminum, stainless steel striker), soft studio shadows, 3/4 angle view clearly showing the disc bell sitting at the peak of the horn, separated from the hood."

Parameters

This model was generated without adjustable parameters. Open it in the editor to add your own dimensions.

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.