Plates and panels
Stepped Shaft with Flange (ASME Y14.5 drawing sheet plate)
- Bounding box
- 420.0 × 297.0 × 90.0 mm
- Engine
- Precision B-rep
- Parameters
- 37
- Published
- October 18, 2026
Download
Free to download and use. See the terms.
The prompt
Use the existing imported STEP model. Do not create a new part or change its dimensions. Create ONE A3 landscape engineering drawing of this SAME part, with front, end, section and isometric views. Dimension the actual geometry: overall length 258 mm, flange Ø90 × 12 mm, and 6 × Ø9 holes on a Ø70 bolt circle. Verify these dimensions against the model. Add all 14 traditional GD&T characteristics: straightness, flatness, circularity, cylindricity, parallelism, perpendicularity, angularity, position, concentricity, symmetry, line profile, surface profile, circular runout and total runout. Use ASME Y14.5-2009. Define suitable datums from the actual geometry. Use proper feature control frames, correct attachments and clearly identified educational tolerance values. Do not infer a 30° face unless the model actually has one. If any characteristic requires an additional feature, explain the required modification before changing the model. Keep all views and 14 controls on ONE sheet, with readable dimensions and minimal leader crossings. Export ONE single-page vector PDF and save the editable drawing. Mark: “EDUCATIONAL GD&T TEST — NOT FOR PRODUCTION.” If this application cannot create dimensioned drawings, GD&T or PDF exports, state which capabilities are unavailable instead of generating another 3D model.
Parameters
| Name | Value | Range |
|---|---|---|
| Journal A Diameter | 30 mm | 10 – 60 |
| Journal A Length | 45 mm | 10 – 150 |
| Collar Diameter | 40 mm | 12 – 80 |
| Collar Length (each side of flange) | 8 mm | 2 – 40 |
| Flange Diameter (GIVEN 90) | 90 mm | 40 – 200 |
| Flange Thickness (GIVEN 12) | 12 mm | 4 – 40 |
| Flange Hole Count (GIVEN 6) | 6 pcs | 3 – 12 |
| Flange Hole Diameter (GIVEN 9) | 9 mm | 3 – 18 |
| Bolt Circle Diameter (GIVEN 70) | 70 mm | 30 – 160 |
| Journal B Diameter | 36 mm | 10 – 70 |
| Journal B Length | 40 mm | 10 – 150 |
| Flat Section Diameter | 32 mm | 8 – 70 |
| Flat Section Length | 35 mm | 5 – 120 |
| Milled Flat Depth | 4 mm | 0.5 – 10 |
| Taper Transition Length | 18 mm | 2 – 80 |
| Journal C Diameter (GIVEN 28) | 28 mm | 8 – 60 |
| Journal C Length | 52 mm | 10 – 150 |
| Curved Nose Length | 40 mm | 5 – 100 |
| Nose End Diameter | 22 mm | 4 – 50 |
| Keyway Length | 30 mm | 5 – 60 |
| Keyway Width | 8 mm | 2 – 16 |
| Keyway Depth | 4 mm | 0.5 – 8 |
| Radial Cross Hole Diameter | 9 mm | 2 – 20 |
| Lathe Centre Hole Pilot Diameter | 2 mm | 1 – 6 |
| Lathe Centre Hole Counterbore Diameter | 6.3 mm | 3 – 12 |
| Lathe Centre Hole Pilot Depth | 5 mm | 1 – 15 |
| Drawing Plate Length (A3 landscape) | 420 mm | 200 – 600 |
| Drawing Plate Width (A3 landscape) | 297 mm | 150 – 500 |
| Drawing Plate Thickness | 2 mm | 1 – 8 |
| Border Frame Margin | 10 mm | 4 – 30 |
| Plate-to-Flange Fusion Overlap | 2 mm | 0.5 – 8 |
| Engraving Depth (frame / title block) | 0.8 mm | 0.2 – 1.5 |
| Title Block Length | 128 mm | 40 – 300 |
| Title Block Width | 45 mm | 15 – 120 |
| Feature Control Frame Cells (14 GD&T char.) | 14 pcs | 1 – 14 |
| FCF Cell Length | 30 mm | 10 – 60 |
| FCF Cell Width | 9 mm | 4 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Orbital Launch Vehicle Display Model
Highly detailed, realistic non-functional space-launch rocket display model for 3D printing: 240 mm tall, 34 mm max diameter, tapered interstage, ogive nose, fairing seam, service