Plates and panels
Steel Panel Frame (40x40x3 RHS)
- Bounding box
- 3030.0 × 40.0 × 1829.0 mm
- Engine
- Precision B-rep
- Parameters
- 5
- Published
- November 19, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precision rectangular steel panel frame in millimeters on the XZ plane. Build the outer perimeter frame from 40mm x 40mm hollow square tube (3mm wall thickness) with an overall outer width of 3030mm along X and an overall outer height of 1829mm along Z. Add one vertical center stiffener tube of the same 40mm x 40mm x 3mm hollow square section centered at X = 1515mm, running between the inside faces of the top and bottom horizontal rails.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Width (X) | 3030 mm | 600 – 6000 |
| Overall Height (Z) | 1829 mm | 400 – 4000 |
| Tube Outside Size | 40 mm | 20 – 120 |
| Tube Wall Thickness | 3 mm | 1 – 15 |
| Centre Stiffener X Position | 1515 mm | 100 – 2930 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Gabinete Gamer DeX com Suporte Interno para Hub USB-C
Atualize o projeto 3D existente sem mudar o restante do design. - Esconda o hub USB-C em um compartimento interno com tampa removível. - Crie um suporte para o hub entre duas pare
Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
Interdigital Electrode Pattern
### FIG. 2 — Top plan view of the interdigital electrode pattern *Suggested template: USPTO Line Art / Electronic Circuit* ``` FIG. 2: A top plan (bird's-eye) view of an interdigi
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
FPV Drone Frame (Exploded)
I want a design of a FPV 5 inch carbon frame of a FPV drone racing. Inspied on switchback five 33 frame and similar to BCROW v7. 5mm arms and 2mm top and bottom plate. Make a desig
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
